« previous next »
Pages: [1]

Author Topic: Birch Bow  (Read 3171 times)

0 Members and 1 Guest are viewing this topic.

Offline IDTrapper

  • Member
  • Posts: 5
Birch Bow
« on: April 14, 2017, 01:14:43 pm »
Well I think I figured out how to upload photos!  This is my very first bow build, I'm shouting for 45 lbs, at 28".   Still in the tillering process, but I think it's going fairly well.  Since it's birch, I will be backing with rawhide








Logged
Greg

Offline bubby

  • Member
  • Posts: 11,054
Re: Birch Bow
« Reply #1 on: April 14, 2017, 01:20:09 pm »
In my opinion if you are gonna rawhide back it ya might as well do it now
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bushboy

  • Member
  • Posts: 2,256
Re: Birch Bow
« Reply #2 on: April 14, 2017, 01:21:36 pm »
Birch(paper)is somewhat low in compressions ,follow Tim bakers mantra to a T is critical.your mid limbs have move considerably more.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline IDTrapper

  • Member
  • Posts: 5
Re: Birch Bow
« Reply #3 on: April 14, 2017, 01:24:31 pm »
Yep, I haven't done anymore tillering, i don't have any rawhide, but I did order some yesterday.  Tillering is at a standstill until it arrives.  I'm working in shaping and thinning the handle, and I just started shaping a vine maple stave.  That should keep me busy until the rawhide arrives.  That vine maple is some hard stuff compared to birch  ;D
Logged
Greg

Offline aaron

  • Member
  • Posts: 1,037
Re: Birch Bow
« Reply #4 on: April 14, 2017, 01:25:42 pm »
Consider making it a bendy handle...how long is it. ?.
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline IDTrapper

  • Member
  • Posts: 5
Re: Birch Bow
« Reply #5 on: April 14, 2017, 01:39:24 pm »
It's 62 NTN, what would be the advantage of making it a bendy handle? I'm all ears, I'm hoping I don't screw up my first bow, but I figured I'd probably break or mess up a few before I get a solid working one.
Logged
Greg

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Birch Bow
« Reply #6 on: April 14, 2017, 01:43:41 pm »
For a 28" draw birch bow you should be no less than 68" ntn and 2" wide at the fades.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline aaron

  • Member
  • Posts: 1,037
Re: Birch Bow
« Reply #7 on: April 14, 2017, 03:19:43 pm »
If all parts bend, the stress is more spread out.. Less likely to break
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: Birch Bow
« Reply #8 on: April 15, 2017, 02:05:14 am »
What specie's birch is it? I haven't worked with any birch but I do have a black birch bow made by planb. I don't remember the specs off hand but it is a sweet shooter.
Logged
Steve Bennett

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Birch Bow
« Reply #9 on: April 15, 2017, 02:45:58 am »
Don't shape a handle until a bow is finished. That way you can guarantee the string line will go through the middle of the grip.
You wouldn't sand and varnish it now would you :) ?
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Birch Bow
« Reply #10 on: April 15, 2017, 09:02:54 am »
If you want a stiff handle bow then I would reduce the size of it so that what you have left just fits in your hand.  That way you will add a bit more working limb to your bow

P.S. If your back is pristine then you shouldn't need a rawhide backing
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Birch Bow
« Reply #11 on: April 15, 2017, 02:04:12 pm »
Yes, I agree with Marc. Use a 4 inch handle and 1.5 inch fades. Make sure the stave starts to bend at the end of the fades. and increases outward.
Then post another photo.
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »