« previous next »
Pages: [1]

Author Topic: Staining dense wood  (Read 1314 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Staining dense wood
« on: March 28, 2017, 12:37:26 pm »
I'm trying to stain an Ocean Spray Bow. It's very dense wood, approaching SG=1. All I've tried so far is Watco Oil and it just seems to float on top. If I wipe it at all, it all comes off. The stave was shellacked but I scrubbed it with alcohol and lacquer thinner. Any suggestions?
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Staining dense wood
« Reply #1 on: March 28, 2017, 12:38:40 pm »
Quote from: DC on March 28, 2017, 12:37:26 pm
I'm trying to stain an Ocean Spray Bow. It's very dense wood, approaching SG=1. All I've tried so far is Watco Oil and it just seems to float on top. If I wipe it at all, it all comes off. The stave was shellacked but I scrubbed it with alcohol and lacquer thinner. Any suggestions?
Fiebings leather dye.
Logged

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Staining dense wood
« Reply #2 on: March 28, 2017, 02:44:25 pm »
Alcohol or oil based aniline dyes.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Staining dense wood
« Reply #3 on: March 31, 2017, 05:43:49 pm »
Agreed... if you want deep color on dense wood, use dyes....
Logged
Pages: [1]
« previous next »