Ist backed bow attempt. How am I doing?

[Red Dwarf]

 

I have just removed my 1st attempt at a backed bow from the cawl.
It is a hickory backed elm board, 62" ntn, 1 1/2" wide for 1st 4" and then tapers to 3/4" tips at present.
It had 1/4" of deflex before the backing was applied, but came off of the cawl with 5/8 of reflex.
I have floor tillered as per Dean's facet method and have just tried it on a long string: it currently pulls 30# @ 6" on this long string.
Its mass is 18 oz and the reflex has increased by almost 1/8" with the removal of belly wood.
I am searching for 45# @ 26" but  am concerned that I may not have enough mass.
The board feels really "lively" in its present state.

I am feeling a little nervous on this one and would appreciate some guidance from you experienced guys.


Red Dwarf

[Red Dwarf]

Here it is pulling 42# @ 10 of pull on a long string.

[attachment deleted by admin]

[Justin Snyder]

Lots of weight left in that wood.  Try getting righty bending like lefty and you will be close to brace.  You could remove a little bit from the outer limbs also, but I would work on getting them bending the same first.  Justin

[cowboy]

Lookin dandy to me . Now that I focus, that right is a tad stiffer than the left - man that was hard to see. Thinking about making me one of those back boards to really fine tune a tiller. That is looking great though - really!!