Author Topic: Back sealing  (Read 1229 times)

0 Members and 1 Guest are viewing this topic.

Offline Morgan

  • Member
  • Posts: 1,028
Back sealing
« on: March 02, 2017, 01:55:24 pm »
Hey guys, I've read on here how some seal the backs of freshly peeled staves with varnish and other things. I seal ends with whatever old bottle of titebod I have around, but have never done a back. How in the world would you get a stain or dye to take to the back even if you sanded it? There are so manny nooks and crannies to hold the stuff.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Back sealing
« Reply #1 on: March 02, 2017, 01:58:51 pm »
Shellac might be a better option if you are planning on removing it later on.
I started out with nothin' and I still got most of it left

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Back sealing
« Reply #2 on: March 02, 2017, 02:27:19 pm »
Power wash.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline bjrogg

  • Member
  • Posts: 11,017
  • Cedar Pond
Re: Back sealing
« Reply #3 on: March 02, 2017, 02:33:38 pm »
Morgan I've had pretty good luck putting shellac on back then removing it with denatured alcohol. I had to put the alcohol on about 4 or 5 times wipe it off then lightly scuff off with steel wool.
Bjrogg
I never tried that Ed. That would probably work better than the steel wool
A hot cup of coffee and a beautiful sunrise

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Back sealing
« Reply #4 on: March 02, 2017, 02:37:56 pm »
I use shellac also pretty easy to remove with alchol sombody posted the other day using hair spray havent tried that yet.
If you fear failure you will never Try !

Offline LeightonM

  • Member
  • Posts: 38
Re: Back sealing
« Reply #5 on: March 02, 2017, 09:20:12 pm »
If you are thinking of sealing the hackberry that you've been peeling, I just split and skinned some hackberry and only sealed the ends and I havent had any drying checks on the backs. I even put one in a hotbox and its been fine.

Offline Morgan

  • Member
  • Posts: 1,028
Re: Back sealing
« Reply #6 on: March 02, 2017, 10:50:11 pm »
Leighton, I think I'm going to leave the two peeled be. They ain't very wet at all. If the bark slipped, I probably would have, but we have cool nights and mild days for a while, so i think it'll be ok. I have a backup or two if I'm wrong. Same day, Cut a walnut that was as full of water as any tree I've ever cut.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Back sealing
« Reply #7 on: March 02, 2017, 10:57:05 pm »
You might want to keep them out of the heat and super dry air.  Let them dry slowly for a while.
I started out with nothin' and I still got most of it left

Offline Morgan

  • Member
  • Posts: 1,028
Re: Back sealing
« Reply #8 on: March 03, 2017, 12:47:20 am »
Osage, how long is a while? Temps won't get much over 70 here for the next two weeks and oklahoma don't know what dry air is  :laugh:  they are in my shed / shop. No heat or air, just whatever it is outside. Reckon that'll do?

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Back sealing
« Reply #9 on: March 03, 2017, 07:01:04 am »
That should be fine. 
I started out with nothin' and I still got most of it left

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Back sealing
« Reply #10 on: March 03, 2017, 06:13:00 pm »
I just quit scraping on the bark as soon as I feel comfortable, and seal what's there.  I can usually scrape and sandpaper off poly or the like with whatever is left.