« previous next »
Pages: [1]

Author Topic: oak  (Read 1736 times)

0 Members and 1 Guest are viewing this topic.

Offline jayman448

  • Member
  • Posts: 540
oak
« on: February 25, 2017, 01:56:56 am »
found myself a nice little oak thats clear for a good six feet. how does oak like to be dried? (bark on or off) and what should one look out for when working oak?
Logged

Offline Swamp Thang

  • Member
  • Posts: 323
Re: oak
« Reply #1 on: February 25, 2017, 05:54:00 am »
Different oaks take on different characteristics. Are there any leave under it to identify the tree.
Logged

Offline jayman448

  • Member
  • Posts: 540
Re: oak
« Reply #2 on: February 25, 2017, 06:29:39 am »
My knowledge on trees is sparce. All i kniw is it is some form  of oak...
Logged

Offline Bob Barnes

  • Member
  • Posts: 942
Re: oak
« Reply #3 on: February 25, 2017, 07:05:00 am »
if the leaves are rounded on the ends/lobes, then it's in the white oak family, and if they have pointed ends/fake stickers, then it's one of the red oaks...after that it takes a little more knowledge to pick the variety.
Logged
Seems like common sense isn't very common any more...

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: oak
« Reply #4 on: February 25, 2017, 08:55:29 am »
How about a pic?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: oak
« Reply #5 on: February 25, 2017, 09:06:08 am »
Wait until the growing season, if you can and the bark will slip off easily.
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline jayman448

  • Member
  • Posts: 540
Re: oak
« Reply #6 on: February 25, 2017, 03:11:51 pm »
Ill get a pic up later today
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: oak
« Reply #7 on: February 25, 2017, 03:24:00 pm »
I am not an expert on oak, but I dont think you could go wrong with splitting into a stave,, ends coated of course,,taking off the bark,, and coating the back,, putting in a cooo dry place to cure,, someplace not to heated,,,, if you are impatient like me,, rough it to shape of bow,, coat the back and handle area,, and it will dry faster,, strap into place so it does not twist the wrong way when drying,,
Logged

Offline Swamp Thang

  • Member
  • Posts: 323
Re: oak
« Reply #8 on: February 25, 2017, 10:15:44 pm »
Haha learned that the hard way. First bow was probably going to be a success had it roughed out and all but as it dried it twisted so bad I couldn't work it out.
Logged

Offline loon

  • Member
  • Posts: 1,307
Re: oak
« Reply #9 on: February 26, 2017, 02:03:52 am »
Quote from: bradsmith2010 on February 25, 2017, 03:24:00 pm
I am not an expert on oak, but I dont think you could go wrong with splitting into a stave,, ends coated of course,,taking off the bark,, and coating the back,, putting in a cooo dry place to cure,, someplace not to heated,,,, if you are impatient like me,, rough it to shape of bow,, coat the back and handle area,, and it will dry faster,, strap into place so it does not twist the wrong way when drying,,
how do you strap it into place though?
Logged

Offline Swamp Thang

  • Member
  • Posts: 323
Re: oak
« Reply #10 on: February 26, 2017, 04:57:20 pm »
Quote from: loon on February 26, 2017, 02:03:52 am
Quote from: bradsmith2010 on February 25, 2017, 03:24:00 pm
I am not an expert on oak, but I dont think you could go wrong with splitting into a stave,, ends coated of course,,taking off the bark,, and coating the back,, putting in a cooo dry place to cure,, someplace not to heated,,,, if you are impatient like me,, rough it to shape of bow,, coat the back and handle area,, and it will dry faster,, strap into place so it does not twist the wrong way when drying,,
how do you strap it into place though?

I now just clamp mine to my work table and let dry
Logged
Pages: [1]
« previous next »