« previous next »
Pages: [1]

Author Topic: Unbending recurves  (Read 1029 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Unbending recurves
« on: February 21, 2017, 08:16:30 pm »
I while back I made a recurve that was too narrow and I couldn't get it to hold a string so it went in the barrel of shame. Now I have a young fella looking for a bow. Will it do any harm to steam the recurves out, or most of the way out? I'll probably leave the tips flipped.
« Last Edit: February 21, 2017, 10:02:50 pm by DC »
Logged

Offline LittleBen

  • Member
  • Posts: 190
Re: Unbending recurves
« Reply #1 on: February 21, 2017, 10:04:52 pm »
If you have sufficient length just cut the tips down a bit. That will make it a lot more stable.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Unbending recurves
« Reply #2 on: February 21, 2017, 10:29:39 pm »
I agree with Ben.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: Unbending recurves
« Reply #3 on: February 21, 2017, 10:51:10 pm »
That or glue on some string bridges
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

mikekeswick

  • Guest
Re: Unbending recurves
« Reply #4 on: February 22, 2017, 03:16:30 am »
No problem with steaming them again to straighten.
Stability isn't just linked to the length of recurves on wooden bows it is more to do with limb alignment and other issues.
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Unbending recurves
« Reply #5 on: February 22, 2017, 06:42:21 am »
When unbending, you don't even need to apply pressure.  Just heat and watch it unfold back towards its original shape.  Dry heat or steam will both work
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Unbending recurves
« Reply #6 on: February 22, 2017, 11:10:01 am »
It didn't unfold by itself but it was very easy to unbend. We'll see how it gos.
Logged
Pages: [1]
« previous next »