Author Topic: Hickory backed walnut?  (Read 1241 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Lobbestael

  • Member
  • Posts: 465
Hickory backed walnut?
« on: February 03, 2017, 10:04:29 pm »
I have not worked with bw before. Is hickory backed black Walnut a good combo?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Hickory backed walnut?
« Reply #1 on: February 03, 2017, 10:11:16 pm »
The times I backed walnut with hickory the walnut fretted. It was years ago and could have been me.  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: Hickory backed walnut?
« Reply #2 on: February 03, 2017, 10:34:31 pm »
Yup, I'd probably do walnut backed hickory instead.

Tattoo Dave
Rockford, MI

Offline bubby

  • Member
  • Posts: 11,054
Re: Hickory backed walnut?
« Reply #3 on: February 03, 2017, 11:34:41 pm »
Use maple
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

mikekeswick

  • Guest
Re: Hickory backed walnut?
« Reply #4 on: February 04, 2017, 03:19:25 am »
I've done a few and you just need to trap the hickory. A less tension resistant wood would be better. Maple or ash would be great for walnut.

Offline bushboy

  • Member
  • Posts: 2,256
Re: Hickory backed walnut?
« Reply #5 on: February 04, 2017, 10:35:26 am »
like stated ,hickory will over whelm a bw belly easily!i would make the core wide,flat and long going as thin as practical with the hickory lam and trap it.bw is pretty wood,just not top notch in compression when mated with high tension backings.good luck!
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Hickory backed walnut?
« Reply #6 on: February 04, 2017, 11:12:08 am »
Leave a ring of sapwood on the walnut to get the laminated look...lol.
BowEd
You got to stand for something or you'll fall for anything.
Ed