« previous next »
Pages: [1]

Author Topic: Bleeding paint question  (Read 1431 times)

0 Members and 1 Guest are viewing this topic.

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Bleeding paint question
« on: May 08, 2017, 08:10:35 pm »
This may be a long shot, but what the heck...

So I painted over rawhide with black acrylic and wanted to stencil on a pattern on top of the black with spray paint. I did this, waited a while for everything to dry real good, then applied some light-colored wood stain. That's when it happened... the spray paint just bled all over the place, but the acrylic was fine.

I looked at the can and realized it says, "indoor only." As far as I can see, it gives no indication of what kind of paint it is. My question is...

is there any type of finish that can go over this spray paint without making it bleed?

Here's a pic of the can...

Thanks!
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline tattoo dave

  • Member
  • Posts: 1,543
  • Rockford, MI
Re: Bleeding paint question
« Reply #1 on: May 08, 2017, 09:31:10 pm »
Check the ingredients list. The spray paint is probably mostly either acetone or toluene. Those two solvents don't like each other much. The stain was probably one the spray paint was the other, or maybe lacquer. But if it was lacquer the acrylic would have wrinkled a too, I would think.

Tattoo Dave
Logged
Rockford, MI

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Bleeding paint question
« Reply #2 on: May 08, 2017, 11:17:25 pm »
Always do a test run first.   )-w(
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Bleeding paint question
« Reply #3 on: May 09, 2017, 10:48:51 am »
Yes that's a surprise I've had too.From then on I use counter based finishes.Ones that don't mix with each other.Letting them dry good helps too.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline bjrogg

  • Member
  • Posts: 10,876
  • Cedar Pond
Re: Bleeding paint question
« Reply #4 on: May 09, 2017, 11:27:02 am »
Like Pat says do test run, but maybe you could go over with truoil or something clear scuff that up and then use other products.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Bleeding paint question
« Reply #5 on: May 09, 2017, 01:36:29 pm »
seal the acrylic with poly,, then you can spray paint over that,,
Logged

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Bleeding paint question
« Reply #6 on: May 09, 2017, 03:56:45 pm »
Cool. Thanks guys
Logged
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline jaxenro

  • Member
  • Posts: 247
Re: Bleeding paint question
« Reply #7 on: May 09, 2017, 04:01:57 pm »
Oil or water based stain?
Logged
Pages: [1]
« previous next »