The Scallops are strictly Onamental....and really arent that hard to carve into the Sides....if you look at the Profile of the Bow....it is just a regular Flatbow...with the Scallops added....what I am trying to say....is if you draw a straight line from handle to tip.....it is the same on both sides of the Bow....the deepest parts of the Scallops are the same width as the Bow is on the other side..... These were carved out with a Drawknife...so I can see that they would be easy enough to scrape out with a nice sharp piece of Basalt or Flint
[attachment deleted by admin]