« previous next »
Pages: [1]

Author Topic: marble dip  (Read 4668 times)

0 Members and 1 Guest are viewing this topic.

Offline chessieboy

  • Member
  • Posts: 184
marble dip
« on: March 03, 2008, 12:52:52 pm »
I started to marble dip my shafts. I love the look but want to put a finish over the dip. I'm using testers paint for the marble part. They said to use clear arrylic over their emamel but it still bleeds/eats the paint. Anyone have any suggestions? I'll try to get some pics up later still getting the process refined.

Bill
Logged

Offline Sparrow

  • Member
  • Posts: 1,985
  • Who shot cock robin ? I said the sparrow.
    • Dream Fish Charters
Re: marble dip
« Reply #1 on: March 03, 2008, 01:41:25 pm »
 Make sure the paint is good and dry and then some poly.I have been using crystalfin. Frank
Logged
Frank (The Sparrow) Pataha, Washington

Offline chessieboy

  • Member
  • Posts: 184
Re: marble dip
« Reply #2 on: March 03, 2008, 05:16:37 pm »
I let the paint dry for 1 week, dipped in poly and it still ran. >:(  Anyother thoughts?
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: marble dip
« Reply #3 on: March 03, 2008, 05:59:07 pm »
I've used Tru-oil and spray-on poly over acrylic paint with no problems.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

PK

  • Guest
Re: marble dip
« Reply #4 on: March 06, 2008, 03:51:13 am »
ya ever tried using borax in water and then putting oil paint in it stir alittle then dip, Ya get a swirly effect. The Borax keeps the paint at the surface of the water.ya can use multiple colors all at once.
Logged

Offline anglobow

  • Member
  • Posts: 41
Re: marble dip
« Reply #5 on: March 08, 2008, 12:36:48 am »
Use the minwax water based polycrylic that comes in the blue spray can.
Logged
Pages: [1]
« previous next »