Author Topic: Tillering question  (Read 2975 times)

0 Members and 1 Guest are viewing this topic.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Tillering question
« Reply #15 on: December 02, 2016, 01:37:33 pm »
yes,,  :)
its about like increasing the draw till you hit the sweat spot of performance ,, without increasing the set too much,,

Offline DC

  • Member
  • Posts: 10,396
Re: Tillering question
« Reply #16 on: December 02, 2016, 01:44:09 pm »
I think you should try it and record your findings and let us know. Theoretical talk is great and all but nothing can beat hard evidence.

When you're dern near 70 years old and have a lot of stuff left to do you start to leave some things to someone who has more time left ;) It's just something to think about when I resting my back from tillering :D

Offline willie

  • Member
  • Posts: 3,268
Re: Tillering question
« Reply #17 on: December 02, 2016, 01:46:45 pm »
Many things going on at once, and tough to experiment by only changing one parameter at a time.

I am curious if anyone thinks it is even possible to even build a bow with no set, that shoots 180 fps?  (@10 GPP, I assume?)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tillering question
« Reply #18 on: December 02, 2016, 01:51:42 pm »
The nature of would wouldn't allow a wood bow to be built without set.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bow101

  • Member
  • Posts: 2,235
Re: Tillering question
« Reply #19 on: December 02, 2016, 01:56:48 pm »
The nature of would wouldn't allow a wood bow to be built without set.

Best quote I heard in a long time.   
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Badger

  • Member
  • Posts: 8,124
Re: Tillering question
« Reply #20 on: December 02, 2016, 08:55:52 pm »
 0 set maybe impossible 1/4" to 1/2" set. Done it many times.