« previous next »
Pages: 1 [2]

Author Topic: red oak bow, draw knife fail  (Read 3842 times)

0 Members and 1 Guest are viewing this topic.

Offline scp

  • Member
  • Posts: 660
Re: red oak bow, draw knife fail
« Reply #15 on: September 29, 2016, 08:12:40 pm »
For board bows, a small block plane would be much better.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: red oak bow, draw knife fail
« Reply #16 on: September 30, 2016, 06:51:26 am »
Like WGoat said, rasp is much safer, maybe a little slower, not sure on that but much safer. ;)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: red oak bow, draw knife fail
« Reply #17 on: September 30, 2016, 06:16:55 pm »
Nice sharp hand plane set fine works as well
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: red oak bow, draw knife fail
« Reply #18 on: September 30, 2016, 10:15:59 pm »
Working wood like that, which I try to avoid, with a Draw knife I use the blade of a straight knife at a 90dg angle to the wood and pull like a big Cabinet Scraper. You can roll off some big curls doing this and not worry about digging in.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline bubby

  • Member
  • Posts: 11,054
Re: red oak bow, draw knife fail
« Reply #19 on: September 30, 2016, 11:51:40 pm »
Yeah what mullet said. Also with a quality sharp farriers easp i can reduce the limb thickness in about 10-15 mins a limb
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: 1 [2]
« previous next »