« previous next »
Pages: [1]

Author Topic: Tiller check board bow  (Read 1947 times)

0 Members and 1 Guest are viewing this topic.

Offline Lumberman

  • Member
  • Posts: 335
Tiller check board bow
« on: September 05, 2016, 06:52:54 pm »
48# @ 26", I am not sure if I need to get the tips bending more.. Those of you that make D bows what would you do? I put the two draw pics because they might give a little different perspective on the top and bottom limbs in each
Logged

Offline Dictionary

  • Member
  • Posts: 717
Re: Tiller check board bow
« Reply #1 on: September 05, 2016, 07:11:25 pm »


I think you're right. Your tips need to bend a little bit more. This edited ellipse isn't completely centered, but that's what I'm seeing.
« Last Edit: September 05, 2016, 07:26:22 pm by Dictionary »
Logged
"I started developing an eye for those smooth curves as a young man.  Now that my hair is greying and my middle spreading I make bows instead."

-JW_Halverson

Offline le0n

  • Member
  • Posts: 540
Re: Tiller check board bow
« Reply #2 on: September 05, 2016, 08:50:12 pm »
I laid my drinking cup over my phone screen (custom zoom) and it looks good to me.
Logged

Offline loon

  • Member
  • Posts: 1,307
Re: Tiller check board bow
« Reply #3 on: September 05, 2016, 10:29:25 pm »
It seems slightly hingey between or on one of these.. it's hard to tell. maybe it's just an illusion because the bow's color is lighter there

Have you made a tillering gizmo? Seems essentially just a block of wood with a hole for a pencil in the middle

« Last Edit: September 05, 2016, 11:37:55 pm by loon »
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Tiller check board bow
« Reply #4 on: September 05, 2016, 10:58:38 pm »
You can get your mid-outer limbs bending more. Go slow, they come around real quick
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Tiller check board bow
« Reply #5 on: September 06, 2016, 03:06:50 am »
+1
Most of your bend is on the inner 1/3 of the limbs.
Lower has a slightly better curve.
Just narrowing the out half and rounding off corners may be enough to bring it round.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Lumberman

  • Member
  • Posts: 335
Re: Tiller check board bow
« Reply #6 on: September 06, 2016, 06:37:59 am »
Thank you sirs!
Logged
Pages: [1]
« previous next »