« previous next »
Pages: [1]

Author Topic: Where to find.......?  (Read 1490 times)

0 Members and 1 Guest are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Where to find.......?
« on: September 01, 2016, 11:57:56 pm »
What stores sell unibond 800 in Canada..?  Has anyone used Weldbond,  it seems like a good product and it stays flexible.,  not sure if it has gap filling properties though.
« Last Edit: September 02, 2016, 12:33:44 am by bow101 »
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Stoker

  • Member
  • Posts: 1,729
Re: Where to find.......?
« Reply #1 on: September 02, 2016, 09:22:16 am »
Have you tried Lee Valley
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Where to find.......?
« Reply #2 on: September 02, 2016, 10:56:09 am »
bow101, I've used Weldwood Plastic Resin with good results. It was very similar to Urac but mixes with water. As long as you keep the powder dry it has an unlimited shelf life. I don't know why more people don't use it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bow101

  • Member
  • Posts: 2,235
Re: Where to find.......?
« Reply #3 on: September 02, 2016, 11:04:06 am »
Thanks I'll check it out.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Where to find.......?
« Reply #4 on: September 02, 2016, 11:11:43 am »
It's cheap and easy. Hard to believe it is any good...but it is!   ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Where to find.......?
« Reply #5 on: September 02, 2016, 11:45:25 am »
I use Weldwood Plastic Resin for bamboo to wood joints and am very happy with the results.  Mixes with water.  Never had a failure.  I had a few failures with URAC, but I think they were due to the URAC being beyond its shelf life.  No such worries with Weldwood - just keep your powder dry and don't shoot till you see the whites of their eyes . . . .

Russ
Logged
Pages: [1]
« previous next »