« previous next »
Pages: [1]

Author Topic: scraping limbs  (Read 3277 times)

0 Members and 1 Guest are viewing this topic.

Offline sailordad

  • Member
  • Posts: 5,045
scraping limbs
« on: March 01, 2008, 12:35:29 am »
 i was wondering which is the better way to scrape limbs

should one scrape from handle to tips or from tips to handle?

or does it not matter?

thanks for the feedback.
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: scraping limbs
« Reply #1 on: March 01, 2008, 12:49:51 am »
I'm thingking handle to tips - seems like the grain tapers better that way.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Strongbow88

  • Member
  • Posts: 91
Re: scraping limbs
« Reply #2 on: March 01, 2008, 12:50:48 am »
I scrape from the handle to the tips, But I have only made one bow.
Logged
Danny Johnson

Offline DanaM

  • Member
  • Posts: 9,211
Re: scraping limbs
« Reply #3 on: March 01, 2008, 08:41:37 am »
I usually go from handle to tips but sometimes ya hit a spot that the scraper chatters on then I go the other way
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: scraping limbs
« Reply #4 on: March 01, 2008, 10:34:05 am »
Same here. You're feathering the taper out on the belly, so if you go tip to handle, you're working against the grain of the wood. Like Dana said, sometimes you hit a weird spot that scrapes better in another direction, though.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: scraping limbs
« Reply #5 on: March 03, 2008, 10:39:31 am »
What Dana and Hillbilly said.I kind of lighten up as I get toward the last 6 or 8 inches to just
feather it out and catch it up while tillering.I have seen folks almost cut the tips off where they scrap without doing that.They just keep getting deeper and deeper as the go down the limb.And
that ant good.The limb is narrower toward the end so it is easy to get to much , be careful there. :)
     Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline adb

  • Member
  • Posts: 5,339
Re: scraping limbs
« Reply #6 on: March 03, 2008, 12:54:03 pm »
It doesn't matter, until you start working the fades, from handle riser to limbs. In this area, it's really important to work from the belly into the fades. In other words, working from the tip, into the fades. Otherwise, if you work from the riser down into the fades, you will create a low spot, and possibly a hinge.
Logged
Pages: [1]
« previous next »