« previous next »
Pages: 1 [2]

Author Topic: Dry fire  (Read 3650 times)

0 Members and 1 Guest are viewing this topic.

Offline mwosborn

  • Member
  • Posts: 806
  • Mitch Osborn
Re: Dry fire
« Reply #15 on: August 18, 2016, 01:25:36 pm »
Quote from: PEARL DRUMS on August 18, 2016, 08:41:37 am
The bow slammed too far forward and that separated wood at the knot, not compressed. So no, not a chrysal. Its a tear. IMO.

Could be right.  Would be easy to check.  Stress that area a little and it should open up the "tear".
Logged
Enjoy the hunt!  Mitch

Offline DC

  • Member
  • Posts: 10,396
Re: Dry fire
« Reply #16 on: August 18, 2016, 01:28:57 pm »
It's sawdust now. read about 9-10 posts back.
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Dry fire
« Reply #17 on: August 18, 2016, 04:40:29 pm »
what Pearl said,, I had a friend dry fire his bow, did the same thing
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Dry fire
« Reply #18 on: August 18, 2016, 06:15:17 pm »
I would much rather that it broke from momentary stupidity on my part than a fault in my tillering. The patch turned out good and I have pulled it to 28" but I'll let the epoxy cure for a day or so before I shoot it a bunch.
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Dry fire
« Reply #19 on: August 18, 2016, 06:53:25 pm »
Looks like as good a job of patching as anybody could do.Sure hope it works for ya.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Dry fire
« Reply #20 on: August 18, 2016, 07:21:42 pm »
Quote from: PEARL DRUMS on August 18, 2016, 08:41:37 am
The bow slammed too far forward and that separated wood at the knot, not compressed. So no, not a chrysal. Its a tear. IMO.

Yep, that is what I was talking about.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?
Pages: 1 [2]
« previous next »