« previous next »
Pages: 1 [2]

Author Topic: Copper Question!  (Read 4768 times)

0 Members and 1 Guest are viewing this topic.

Offline le0n

  • Member
  • Posts: 540
Re: Copper Question!
« Reply #15 on: July 14, 2016, 01:38:32 am »
Here's my newest copper percussion tool.

Not sure if it will work, but it feels like it has enough weight to work just fine.

The solid copper sphere is attached with fer-l-tite. We'll see if the glue has good enough shock resistance.



I cupped the end of the dowel with my lathe. 
Logged

Offline Dakota Kid

  • Member
  • Posts: 897
  • Maker of Things
Re: Copper Question!
« Reply #16 on: July 21, 2016, 03:57:50 pm »
Did that ball pop off yet?

 If it held, I have a new found respect for fer-l-tite. You may need to tap out the bottom and use a double pointed screw and put one end into the ball and the other into the handle. Wrap the end of the handle where the screw is with sinew or synthetic braid string soaked in glue. I'd imagine that would keep it in place.
Logged
I have nothing but scorn for all weird ideas other than my own.
~Terrance McKenna

Offline le0n

  • Member
  • Posts: 540
Re: Copper Question!
« Reply #17 on: July 21, 2016, 07:55:55 pm »
^^ yep :laugh:

it never even saw rock. i was testing it in the palm of my hand.

it definitely needs a stem. i'll sweat a copper rod into it.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Copper Question!
« Reply #18 on: July 21, 2016, 09:21:13 pm »
Drill a hole through the center and drive a copper nail into the wood with JB Weld.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Re: Copper Question!
« Reply #19 on: July 22, 2016, 08:27:08 am »
Knotty,
Is your silver   ,,,, silver plate or does it have a hallmark as sterling.
Logged

Offline Knotty

  • Member
  • Posts: 504
  • Don't regret your past, learn from it.
Re: Copper Question!
« Reply #20 on: July 22, 2016, 12:44:59 pm »
It doesn't have the mark on it, but it was brought to a couple jewelers to test, and they assured it's silver.
Logged
~Isaia

Offline le0n

  • Member
  • Posts: 540
Re: Copper Question!
« Reply #21 on: July 22, 2016, 01:50:34 pm »
^^ sell the sterling to buy rocks 8)

Quote from: mullet on July 21, 2016, 09:21:13 pm
Drill a hole through the center and drive a copper nail into the wood with JB Weld.

because i can't drill straight into the end of a dowel, i don't believe i'll magically be able to drill straight into the center of a sphere.

i've decided to just flare the end of a small handle-length section of 1/2" or 3/4" hard copper tubing (whichever one i have in my junk box). then sweat/solder the sphere on the end of it. i can always leather wrap it.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Copper Question!
« Reply #22 on: July 22, 2016, 03:40:53 pm »
Guess it would be difficult if you don't have a Drill Press with a clamp.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Copper Question!
« Reply #23 on: July 24, 2016, 05:21:20 pm »
 Vice, drill hole thought the copper ,throught the woods lenght. And get a peice of all tread, washer tighten it down.

Coppers use because it's a solf metal. Its right there with lead then gold its our softest metal, we have.
 Like solf antler when pushed into the edge. Even though the edge looks,pointy,smooth to us it's not it's felled with cuts,grove holes etc. When pushed in the solf copper fills these places enabling to hold so you can pop a flake off.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING
Pages: 1 [2]
« previous next »