Main Discussion Area > HowTo's and Build-a-longs

Quail Call build along

(1/3) > >>

PK:
Used to use these long time ago. Take a 4" By 1/2 piece of branch and rip it.
Wittle out 1/2 in from the end to the center until about a 1/6" hollow on both pieces.
take a rubber band and sandwich it between the 2 pieces, apply Hide Glue to one end And wrap with sinew tite.
now pull the rubber band on the other end and blow until desired tone is achieved.
Glue and wrap that side. there ya have a Quail call.
darn photo sharing messed up my build along so I did it over.
now try to Make the sound Chekeeta While blowing through the call.


[attachment deleted by admin]

PK:
Yes Dana, it would drive my wife to drive me out of the house. Sorry I had problems up -loading so I started over.

cowboy:
Now there's an interesting little call. Quail all around this jobsite - may make one just to mess with em :).

John K:
Cool ! To bad we don't have Quail around here....but i bet it would work for Yotes..............

Otoe Bow:
Cool PK. Seems simple enough to try.

Directions for use:  Hold up to mouth and say, "bob white".   ;D

Otoe

 

Navigation

[0] Message Index

[#] Next page