Author Topic: To mess with or not? That is the question.....  (Read 2551 times)

0 Members and 1 Guest are viewing this topic.

Offline Justin.schmidt23

  • Member
  • Posts: 145
To mess with or not? That is the question.....
« on: July 18, 2016, 02:07:20 am »
So I built my first(and only) bow a few years ago it's a red oak board bow pyramid style. It works but I'm not pleased with my craftsmanship at all. I was impatient when I made it and just wanted to shoot it. It shoots very well. I'd like to make the takers shorter I'm not a fan of the pyramid style I built. Wife says leave it alone and do better next time. The perfectionist in me won't let me leave it alone. What do you gents think?




"Good enough " is never good enough. Take pride in everything you do.

mikekeswick

  • Guest
Re: To mess with or not? That is the question.....
« Reply #1 on: July 18, 2016, 02:17:11 am »
Obviously you could re-worki it but i'd leave well alone and start again. Make your fades 2 inches long and blend everything together with curves.

Offline Justin.schmidt23

  • Member
  • Posts: 145
Re: To mess with or not? That is the question.....
« Reply #2 on: July 18, 2016, 02:19:34 am »
Ok that's about how long the fades are now I just didn't fade them well at all lol.
"Good enough " is never good enough. Take pride in everything you do.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: To mess with or not? That is the question.....
« Reply #3 on: July 18, 2016, 06:32:47 am »
I would leave it alone and start a new one.  After you have been making them a few years compare a recent bow to that first one.  It will let you see how far you have come.
I started out with nothin' and I still got most of it left

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: To mess with or not? That is the question.....
« Reply #4 on: July 18, 2016, 06:37:46 am »
I also agree with Osage its interesting to look back
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: To mess with or not? That is the question.....
« Reply #5 on: July 18, 2016, 08:11:47 am »
You might tinker with it and end up worse off.  Ask me how I know.
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: To mess with or not? That is the question.....
« Reply #6 on: July 18, 2016, 08:31:20 am »
Leave it and start a new one.
Freedom dies one compromise at a time. III%

Offline Badger

  • Member
  • Posts: 8,124
Re: To mess with or not? That is the question.....
« Reply #7 on: July 18, 2016, 08:59:16 am »
  After you get a few bows under your belt you will want to hide the evidence of your early builds. I would simply start another one. I will on occasion rework a bow but only if I have a very specific reason for doing so.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: To mess with or not? That is the question.....
« Reply #8 on: July 18, 2016, 09:04:33 am »
Start another one. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Jim Davis

  • Member
  • Posts: 1,350
  • Reparrows
    • Reparrows
Re: To mess with or not? That is the question.....
« Reply #9 on: July 18, 2016, 12:24:00 pm »
I am often the contrarian. I say taper the sides of the "fades" from the beginning right to the handle. Round the new edges heavily on the belly side and slightly on the back.

You're not reworking the bow. You are finishing what you started.

Jim Davis
Jim Davis

Kentucky--formerly Maine

Offline Justin.schmidt23

  • Member
  • Posts: 145
Re: To mess with or not? That is the question.....
« Reply #10 on: July 18, 2016, 01:21:27 pm »
You all sound like my wife  ;D
Ash I like the way you put that but I reckon I will just leave her be for now thank you gentleman.
"Good enough " is never good enough. Take pride in everything you do.

Offline hunterbob

  • Member
  • Posts: 890
Re: To mess with or not? That is the question.....
« Reply #11 on: July 18, 2016, 07:28:49 pm »
Listen to your wife man. Smart woman

Offline Justin.schmidt23

  • Member
  • Posts: 145
Re: To mess with or not? That is the question.....
« Reply #12 on: July 18, 2016, 07:30:19 pm »
Lol normally she's right but I can't let her know that ;)
"Good enough " is never good enough. Take pride in everything you do.

Offline bjrogg

  • Member
  • Posts: 10,987
  • Cedar Pond
Re: To mess with or not? That is the question.....
« Reply #13 on: July 18, 2016, 07:44:32 pm »
Unless its something really worth arguing about I just say your right dear I don't know what I was possibly thinking. We both get a chuckle and it ends discussion 😊
A hot cup of coffee and a beautiful sunrise

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: To mess with or not? That is the question.....
« Reply #14 on: July 18, 2016, 07:56:41 pm »
You all sound like my wife  ;D
Ash I like the way you put that but I reckon I will just leave her be for now thank you gentleman.
asharrow  sounding like a wife ........OH my goodness........I need to sign off... :) :)
Integrity is doing the right thing when no one is looking