« previous next »
Pages: [1]

Author Topic: Preserving deer hide handle on bow?  (Read 2198 times)

0 Members and 1 Guest are viewing this topic.

Offline Lumberman

  • Member
  • Posts: 335
Preserving deer hide handle on bow?
« on: July 10, 2016, 03:25:42 pm »
I have been around taxidermy my whole life but haven't paid close enough attention I guess. Using a tanned deer hide strip for the handle what should I use to oil it?  I know a real basic oil was used originally but this hide is super old. Just finding a spot that was in good shape was a bit of a challenge, but down by the back legs she was holding up great. Off my first deer 14 years ago is why I am even messing with it. I didn't know if teak oil would be okay or if I should tb3 it down nice and hard. What would you do?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Preserving deer hide handle on bow?
« Reply #1 on: July 10, 2016, 04:53:42 pm »
If you are going to oil it use neatsfoot oil, mink oil, Montana Pitch Blend or bear(animal) grease.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Preserving deer hide handle on bow?
« Reply #2 on: July 10, 2016, 05:45:42 pm »
I agree with Pat B for oil used.Neats foot oil.Just enough to make it supple.Not over oiled any.Assuming you have a chrome tanned hide there.
Many a time I've used contact cement for leather onto wood with good success for the handle.It stays.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Lumberman

  • Member
  • Posts: 335
Re: Preserving deer hide handle on bow?
« Reply #3 on: July 10, 2016, 05:52:42 pm »
Thank you sirs!
Logged
Pages: [1]
« previous next »