« previous next »
Pages: 1 [2]

Author Topic: Tiller Check -UPDATED-  (Read 3090 times)

0 Members and 1 Guest are viewing this topic.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Tiller Check -UPDATED-
« Reply #15 on: July 04, 2016, 02:27:16 pm »
How wide is it at the fades?  That arrow rest looks scary to me.  How much meat do you have there. Are you getting any movement there?
Logged
Freedom dies one compromise at a time. III%

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Tiller Check -UPDATED-
« Reply #16 on: July 04, 2016, 03:23:34 pm »
Looks good.  Nice job!
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline silent sniper

  • Member
  • Posts: 281
Re: Tiller Check -UPDATED-
« Reply #17 on: July 04, 2016, 03:51:58 pm »
Timothy, The riser section has a  8" long 3/4" thick piece of Ipe glued onto the limb section.  She is as solid as a rock. The finished pictures will show what I mean. Thank you for your concerns though.
Logged

mikekeswick

  • Guest
Re: Tiller Check -UPDATED-
« Reply #18 on: July 05, 2016, 03:31:39 am »
Your handshock is down to the lower limb being a little weak. Remove just a little wood upper limb (80 grit sandpaper) evenly with shooting inbetween removals until the shock disappears :)
Remember that any set no matter how small is telling you something! Set in one limb and not the other means it's a bit weak, therefore is feeling more strain = set.
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Tiller Check -UPDATED-
« Reply #19 on: July 05, 2016, 07:51:17 am »
SS.....looks pretty good and the length of draw there @ 29.5".Pretty impressive.The finished pics will look great too I'm sure.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed
Pages: 1 [2]
« previous next »