Author Topic: Hickory backed ash bloodwood core?  (Read 1554 times)

0 Members and 1 Guest are viewing this topic.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Hickory backed ash bloodwood core?
« on: June 28, 2016, 12:12:08 am »
I've got some bloodwood pieces and thought I'd try a tri lam. What thickness should I make the ash belly. The bloodwood is about 1/4-3/8" thick. I thought about tapering the core. I'm not looking for anything super heavy just around 50-55#. Any help would be greatly appreciated. Thank you Tim.
Freedom dies one compromise at a time. III%

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Hickory backed ash bloodwood core?
« Reply #1 on: June 28, 2016, 08:04:30 am »
I've never made a hickory backed ash bow, I'm not feeling fuzzy warm about it. Can you make the back and belly hickory? Got enough?
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Hickory backed ash bloodwood core?
« Reply #2 on: June 28, 2016, 08:21:11 am »
I've never made a hickory backed ash bow, I'm not feeling fuzzy warm about it. Can you make the back and belly hickory? Got enough?

Sure can! It's all thin for backing you think it would be thick enough?
Freedom dies one compromise at a time. III%

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Hickory backed ash bloodwood core?
« Reply #3 on: June 28, 2016, 08:34:39 am »
If the stack up equals 1/2" or more, your all set. I would taper the core.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Hickory backed ash bloodwood core?
« Reply #4 on: June 28, 2016, 08:38:28 am »
I was thinking that too. Thank you Pearl I appreciate it! 
Freedom dies one compromise at a time. III%