« previous next »
Pages: [1]

Author Topic: Sinew patch long repair question?  (Read 1241 times)

0 Members and 1 Guest are viewing this topic.

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Sinew patch long repair question?
« on: June 24, 2016, 04:44:25 pm »
At the classic this spring a pin knot on my Osage bow popped and started to lift a little. I have a piece of back sinew and am ready to hit the pin knot with some super glue. My question is, should I sand the finish off the area that I plan to patch. I'm supposing the answer is yes, but just making sure. It is sealed with linseed or something similar. I'm trying to start this soon. I plan to strip the sinew and use gelatin for the hide glue. Hope everyone is having a gooder! Hanks for the info. dpg
Logged
(:::.)    Osage music played daily. :)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Sinew patch long repair question?
« Reply #1 on: June 24, 2016, 04:55:21 pm »
Derik, I would get as much of the finish off so the glue adheres to the wood as good as it can.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Sinew patch long repair question?
« Reply #2 on: June 24, 2016, 05:03:58 pm »
Thanks Pat! Use some 220 then reseal when the sinew dries?
Logged
(:::.)    Osage music played daily. :)

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Sinew patch long repair question?
« Reply #3 on: June 24, 2016, 10:12:17 pm »
Yes. ;)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Sinew patch long repair question?
« Reply #4 on: June 24, 2016, 10:13:38 pm »
Glad to see you posting Derik.  Good luck with the repair.
Logged
I started out with nothin' and I still got most of it left
Pages: [1]
« previous next »