« previous next »
Pages: 1 ... 12 13 [14] 15 16 ... 28

Author Topic: My board bow (build along?)  (Read 88643 times)

0 Members and 1 Guest are viewing this topic.

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #195 on: March 07, 2017, 08:44:42 pm »
Do you think it's time to do the short string? I wasn't able to tie the string so that it is perfectly taut so my tillering process is different form yours but the limbs seem to be bending about 3 or 4 inches. After I do my set of scrapes and check it's evenness, I can go to short string I just want to know how one tells when it's time to. In your example you did it quite early on so maybe I don't need to be doing long string as long as I thought I would need to.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: My board bow (build along?)
« Reply #196 on: March 07, 2017, 09:57:59 pm »
Get it bending a few more and then go to around a 3" brace
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #197 on: March 08, 2017, 07:11:46 pm »
I did some more tillering today. I only have about an hour a day to do it but i still am making good progress. I retied the string so that it doesn't have so much slack. This means that it stretches more so I had to see where it bent at 25 lbs which was apparently 13" (or 14 " of draw")
I'm noticing that the right limb is slightly stiffer but it is starting to get more even.
I'm attaching a photo. If anything looks bad please say
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #198 on: March 08, 2017, 08:07:01 pm »
Oh my, posted the wrong photo,  >:(
Here's what I got to today.
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #199 on: March 08, 2017, 08:41:34 pm »
Oh forgot to ask but I've been noticing a gap between the handle riser and the bow. It's been there since I first cut it out but I cannot tell if it's growing. How can I prevent the handle from being popped off?
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: My board bow (build along?)
« Reply #200 on: March 08, 2017, 09:53:50 pm »
Is it a gap, or a glue line?
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #201 on: March 09, 2017, 12:57:16 am »
It definitely lookalike a gap as it's in the fades area only.
I'll attach a picture. I'm going to be wrapping the handle in leather for a grip so maybe it won't be a problem.
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #202 on: March 09, 2017, 12:58:28 am »
Another photo
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: My board bow (build along?)
« Reply #203 on: March 09, 2017, 10:21:46 am »
It's likely not problem. That small gap likely doesn't extend far in and, after shaping handle, will be gone. For peace of mind, put some super glue in there. Good luck.
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #204 on: March 09, 2017, 07:44:14 pm »
Well. I did some more tillering. I was able to get up to #26 at 14" ( so 15" draw length). I've attached pictures so if anything looks wrong please tell. I don't see any hinges and it looks fine so far.
I do have a question. Before I went up to 14" I was using my gizmo and I thought I heard it touch the limb but thine I looked at my limb, no pencil marks where there? Does that mean it was slightly stiff but just not stiff enough for the pencil to make a noticeable mark?
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #205 on: March 09, 2017, 07:45:17 pm »
Here's photos at 13"
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #206 on: March 09, 2017, 07:45:52 pm »
And 14"
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #207 on: March 14, 2017, 11:00:00 pm »
More tillering today. I'm still at 14" but is is getting more even. I don't know if it's just me but does it look like there's a hinge in the left limb or is it just bending more than the other?
Logged

Offline loon

  • Member
  • Posts: 1,307
Re: My board bow (build along?)
« Reply #208 on: March 15, 2017, 01:07:51 am »
It looks like the left limb is weaker to me.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: My board bow (build along?)
« Reply #209 on: March 15, 2017, 01:44:12 am »
You really need to get a little lower with the pic, were looking down on it and that can change how it looks, straight on and close to eye level
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: 1 ... 12 13 [14] 15 16 ... 28
« previous next »