« previous next »
Pages: [1]

Author Topic: Wood Identification?  (Read 1601 times)

0 Members and 1 Guest are viewing this topic.

Offline Knotty

  • Member
  • Posts: 504
  • Don't regret your past, learn from it.
Wood Identification?
« on: June 21, 2016, 05:20:07 pm »
Hey everyone? Found this little board laying around,
What do you think it is?
http://prntscr.com/bjamyn
http://prntscr.com/bjao8m

It's definitely hardwood, has an orange color.. Which makes me think it's Argentine Osage.

The grain is very bad, but I could cut it in half and use it as a belly lamination for a shortbow.

Let me know guys!
Logged
~Isaia

Offline le0n

  • Member
  • Posts: 540
Re: Wood Identification?
« Reply #1 on: June 21, 2016, 05:52:59 pm »
i think that is bow wood.

what are the specs?

just proceed.
Logged

Offline Knotty

  • Member
  • Posts: 504
  • Don't regret your past, learn from it.
Re: Wood Identification?
« Reply #2 on: June 21, 2016, 06:01:33 pm »
It is way too short for a bow, and the grain is just horrible.
It measures 3ft in length and close to 1" in thickness,
I was thinking in either cutting it lengthwise and tapering the two pieces to glue up and make a trilam with
Purpleheart core , Boo backing and that wood as belly.

Or I could make a little bow and not use it pretty much 😂

« Last Edit: June 21, 2016, 06:11:31 pm by Knotty »
Logged
~Isaia

Offline bubby

  • Member
  • Posts: 11,054
Re: Wood Identification?
« Reply #3 on: June 21, 2016, 06:17:54 pm »
Cut two pcs 1-1/2" wide and back it with hickory or boo. Just use a vee splice and glu a handle section on
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Knotty

  • Member
  • Posts: 504
  • Don't regret your past, learn from it.
Re: Wood Identification?
« Reply #4 on: June 21, 2016, 06:58:06 pm »
That's an idea, thanks bubby!
Logged
~Isaia

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,630
Re: Wood Identification?
« Reply #5 on: June 21, 2016, 07:01:06 pm »
It looks like black locust to me but it could be a Brazilian hardwood.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Knotty

  • Member
  • Posts: 504
  • Don't regret your past, learn from it.
Re: Wood Identification?
« Reply #6 on: June 21, 2016, 07:05:58 pm »
There's a very low chance of having an american wood board here at home..
I don't think so, most probably a Brazilian type.
Logged
~Isaia
Pages: [1]
« previous next »