Main Discussion Area > HowTo's and Build-a-longs
Watch me build a reflex deflex boo backed ipe. NOT INSTRUCTIONAL
DanaM:
Thats terrible Jesse better give to me you don't want to be seen with that at Pappy's ;)
Looks pretty damn good to me of course I know nothing about laminated bows.
Jesse:
Thanks Dana if its still alive then you can play with it. ;D I was looking at these pics and trying to see if I can judge which part was working the most based on where on the limbs it took set. My thinking is that it took about 1" set. 3/4 of that was in the inner limb and the tips are 1" down so that must be the other 1/4" since the outer reflexed limbs are shorter it seems like that is about even distribution. Does this make sense or am I thinking about it wrong ??? Jesse
DanaM:
Quit thinkin and just shoot it ;D Its a fine weabon Jesse
Jesse:
Your right Dana. gotta go its a nice day out there :D
Rich Saffold:
Jesse, At this point I'm usually shooting the bow a bit, then unstring it and see how symmetrical the limbs are. Sometimes I adjust it using the scraper I keep in my back pocket, and sometimes I just keep shooting it..How it feels and shoots matters most of all.
Looks great! And do be shy about using arrows a little heavier than 10 gr. per #
Rich
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version