« previous next »
Pages: [1]

Author Topic: Hand drill case (elm bark)  (Read 2475 times)

0 Members and 1 Guest are viewing this topic.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Hand drill case (elm bark)
« on: July 02, 2016, 02:46:19 pm »
Had a pc of elm bark laying around and decided I needed a case to keep my hand drills dry and a good way to carry. Sealed with pine pitch glue and a wood stopper should keep things nice and dry, I need to put a braintan strap on it and call it finished.  Bob
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Hand drill case (elm bark)
« Reply #1 on: July 02, 2016, 06:52:32 pm »
Damn that's nice....I'm always just using flint and steel.I need to be a little more diverse with a drill there.Looks great.Nice set up.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Hand drill case (elm bark)
« Reply #2 on: July 02, 2016, 09:28:39 pm »
That's nice Bob. Is there a wood plug in the bottom too?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Hand drill case (elm bark)
« Reply #3 on: July 02, 2016, 09:45:32 pm »
That is awesome...Good idea

I suppose a smaller one could be made for a bow drill.
Logged
There are no bad knappers, only bad flakes

Offline chamookman

  • Member
  • Posts: 3,026
Re: Hand drill case (elm bark)
« Reply #4 on: July 03, 2016, 04:16:43 am »
Way cool ! Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Hand drill case (elm bark)
« Reply #5 on: July 03, 2016, 08:34:54 am »
Pat, ya just a pc of wood in the bottom also, a little dob of pinepitch glue around it and couldn't see any daylight  shinning thru  :o ;D  Lyman, I made a little braintan sack for my bow drill kit, I just let the bow stick out the top and tie string on to use for sling. Bob
Logged

Offline Zuma

  • Member
  • Posts: 4,324
Re: Hand drill case (elm bark)
« Reply #6 on: July 03, 2016, 10:55:07 am »
You never cease to amaze 8).
Zuma
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Hand drill case (elm bark)
« Reply #7 on: July 03, 2016, 09:59:59 pm »
Bob, I have been putting my "fire bow" inside my arrow quiver and carrying the rest in a separate small bag. Figure if I am out in the woods with a fire bow drill set I would have my hunting bow and quiver with me. I have always suspected a quiver was used for more than just carrying arrows. It is a sort of backpack and quiver.

Those hand drills in the case would also carry nicely in an arrow quiver now that I think about it...
Logged
There are no bad knappers, only bad flakes

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Hand drill case (elm bark)
« Reply #8 on: July 04, 2016, 07:28:37 am »
Lyman, just keep'em dry and becareful hand drills don't penetrate to well :o :o ;D   Bob
Logged
Pages: [1]
« previous next »