« previous next »
Pages: [1]

Author Topic: Antler Shavings  (Read 8110 times)

0 Members and 1 Guest are viewing this topic.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Antler Shavings
« on: May 18, 2016, 10:11:38 am »
In one of the issues awhile back there was a write up about a guy who said he increased the draw weight of a bow by some ten pounds by applying antler shavings mixed with hide glue to the belly of a bow. Has anyone else ever tried that, and what results did you get? It made me wonder as I have never seen anyone on here talk about this process.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Urufu_Shinjiro

  • Member
  • Posts: 709
Re: Antler Shavings
« Reply #1 on: May 18, 2016, 10:33:31 am »
Would make sense, I mean that's what Grozer uses in their "biocomposite" bows, they use ground up horn in a resin for their horn bellies. Sure wish their marketing were clearer about that though, lots of folks think they are using real horn.
Logged

Offline james parker

  • Global Moderator
  • Member
  • Posts: 678
    • huntworthyproductions
Re: Antler Shavings
« Reply #2 on: May 18, 2016, 11:58:33 am »
shavings are probably not going to get  you the compression factor that is needed,,  the conglomerate that is used in Grozer bows, having horn and matrix mix, is more of chunk shaped and sizes,  knowing  the ratio is very important,
 good luck though, please keep us informed with your progress
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Antler Shavings
« Reply #3 on: May 22, 2016, 05:59:51 pm »
Wasn't grozer having problems with the biocomposites failing somewhat?
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Antler Shavings
« Reply #4 on: May 23, 2016, 11:00:16 am »
  While a small amount of antler shavings. Helps with the glue to hold it together. Cooketarrow did this to all his hid glue. He also add a dryed root bark to his glue. I'd tell you but I'd have to kill you.

 But like jame's said there no compression in shavings.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Antler Shavings
« Reply #5 on: May 23, 2016, 11:02:08 am »
Quote from: crooketarrow on May 23, 2016, 11:00:16 am
  While a small amount of antler shavings. Helps with the glue to hold it together. Cooketarrow did this to all his hid glue. He also add a dryed root bark to his glue. I'd tell you but I'd have to kill you.

 But like jame's said there no compression in shavings.

So then how would this increase the draw weight 10 pounds? that is my question. Is it a viable method for increasing weight on a bow? i have lots of antler at my disposal, Far more than horn, or sinew.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Antler Shavings
« Reply #6 on: May 23, 2016, 12:26:19 pm »
Even if it did add 10# to the draw weight the physical weight of the antler and glue would decrease cast. If you need to add to the draw weigh add a belly lam of a compression strong wood like osage or ipe and re-tiller.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Antler Shavings
« Reply #7 on: May 23, 2016, 01:10:23 pm »
Quote from: Pat B on May 23, 2016, 12:26:19 pm
Even if it did add 10# to the draw weight the physical weight of the antler and glue would decrease cast. If you need to add to the draw weigh add a belly lam of a compression strong wood like osage or ipe and re-tiller.

I've only come in under weight once, and that was fixed with a sinew back. I just found it strange in an article in the magazine, and had never heard of anyone doing it, so I was curious if it really was a thing. If it was, well then I would have something to try. Seeing as it might be, but none of the guys here who's experience and opinions I value and trust, I will have to put it in the "Maybe when I don't have anything better to do" file.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Antler Shavings
« Reply #8 on: May 27, 2016, 07:34:58 am »
  That just shows you can't always beleive what you read.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Antler Shavings
« Reply #9 on: May 27, 2016, 10:21:11 am »
Quote from: crooketarrow on May 27, 2016, 07:34:58 am
  That just shows you can't always beleive what you read.

That is why I was surprised to read it in Primitive archer!
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Antler Shavings
« Reply #10 on: June 04, 2016, 07:12:19 pm »
Which issue? Not the bow soaked in salt water and buffalo urine?
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Antler Shavings
« Reply #11 on: June 05, 2016, 05:25:27 am »
Might it be some materials are more efficient at what they do than others.Per mass weight of themselves for what they do.I know epoxy has a modulus.Be it compression or tension.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Antler Shavings
« Reply #12 on: June 05, 2016, 08:22:24 am »
Putting the composite materials into more stressful profiles to get better performance out of them has everything to do with this too.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Redhand

  • Member
  • Posts: 704
  • Marlen Murdock PM109458
Re: Antler Shavings
« Reply #13 on: June 06, 2016, 09:46:58 am »
I read that in Primitive Archer also. It was volume 24 issue 1 / February - March 2016.  In primitive ethics and logic. By Thomas Holt
Logged
Northern Ute
Pages: [1]
« previous next »