« previous next »
Pages: [1]

Author Topic: Wax over Spar Urethane?  (Read 1919 times)

0 Members and 2 Guests are viewing this topic.

Offline ajbruggink

  • Member
  • Posts: 308
  • Aaron Bruggink, Oostburg, WI, USA
Wax over Spar Urethane?
« on: May 02, 2016, 10:18:40 am »
Hey guys,

I have a question about whether or not it is necessary to put a coat of paste wax over a bow sealed with spar urethane or a similar finish if its going to be used in the elements?

Thanks,

Aaron
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Wax over Spar Urethane?
« Reply #1 on: May 02, 2016, 10:42:13 am »
It can't hurt. I would do it but then I'm a belt and suspenders kind of guy. ;)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Wax over Spar Urethane?
« Reply #2 on: May 02, 2016, 11:43:22 am »
You might consider it if you will be shooting in wet weather.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Wax over Spar Urethane?
« Reply #3 on: May 02, 2016, 01:22:07 pm »
Wax over urethane isn't needed at all. But, if you use matte finish the wax wont work in and it leaves white blotching. If you use a gloss urethane it will apply nicely.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: [1]
« previous next »