« previous next »
Pages: [1] 2

Author Topic: opinion poll  (Read 3282 times)

0 Members and 1 Guest are viewing this topic.

Offline Josh B

  • Member
  • Posts: 3,741
opinion poll
« on: April 17, 2016, 10:04:56 pm »
I'm trying to finish up a red mulberry bow for the classic.  Too late into the build I remembered that the guy getting this bow likes arrow shelves.  So I had to build one up.  The question I have is does this shelf look crappy as is or should I wrap it with a handle wrap?  The original plan was to not wrap the handle.  Oh and if your someone that despises arrow shelves, your input probably won't be helpful in this poll.  Thanks!  Josh
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: opinion poll
« Reply #1 on: April 17, 2016, 10:11:08 pm »
Looks fine to me. 
Logged
I started out with nothin' and I still got most of it left

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: opinion poll
« Reply #2 on: April 17, 2016, 10:52:32 pm »
  I'd cut down the simi recurve handle at the palm buldge.

  I'd cut the shelf to center shot. And you have more than enough wood left to open up your risers sight window. Look at a bow catalog look at their handle's risers.

 You can build your wood bows to have handles and risers. That Look just the same. I've been building my bows to have the handles, risers, sight window. for more years than I can remember.

  Man but those copperheads look good don't they. My favorte skinns by far.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline DC

  • Member
  • Posts: 10,396
Re: opinion poll
« Reply #3 on: April 17, 2016, 10:58:23 pm »
I'd take it
Logged

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: opinion poll
« Reply #4 on: April 17, 2016, 11:03:27 pm »
I like it the way it is but you might consider crooketarrows suggestions as he has a lot more experience and probably better taste than I do.  ;D ;D
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: opinion poll
« Reply #5 on: April 17, 2016, 11:04:43 pm »
Josh, I think it looks fine as is.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Emmet

  • Member
  • Posts: 102
Re: opinion poll
« Reply #6 on: April 17, 2016, 11:12:31 pm »
I think It looks fine as is. I like a naked handle.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: opinion poll
« Reply #7 on: April 17, 2016, 11:36:28 pm »
Looks fine Josh, i kinda have the same problem but i wanted to wrap mine, got talked out of it
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Josh B

  • Member
  • Posts: 3,741
Re: opinion poll
« Reply #8 on: April 18, 2016, 02:16:01 am »
Thank you kindly for your input!  I'll keep on keepin on with it then.  Bubby, I wouldn't wrap that riser you have going either.  That's purty!  Josh
Logged

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: opinion poll
« Reply #9 on: April 18, 2016, 02:26:52 am »
That one looks good to me Josh! I don't think it needs a wrap. But I've been known to wrap most of my bows. I done my first bare handle with a glue on build up shelf a while back.

Patrick

Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

mikekeswick

  • Guest
Re: opinion poll
« Reply #10 on: April 18, 2016, 02:31:39 am »
Quote from: crooketarrow on April 17, 2016, 10:52:32 pm
  I'd cut down the simi recurve handle at the palm buldge.

  I'd cut the shelf to center shot. And you have more than enough wood left to open up your risers sight window. Look at a bow catalog look at their handle's risers.

 You can build your wood bows to have handles and risers. That Look just the same. I've been building my bows to have the handles, risers, sight window. for more years than I can remember.

  Man but those copperheads look good don't they. My favorte skinns by far.
I'd have to disagree with your sentiments about cutting to center. I build glass bows too and trust me they are just 'cut to center' you pretty much have to use an I-beam of something bombproof like grp etc or accept that the riser has to be plenty thick at the cut in shelf. You have to design a bow to have a centercut riser from the start and make the riser strong enough. Just cutting to center without any reinforcement is a bad idea.
Logged

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: opinion poll
« Reply #11 on: April 18, 2016, 04:20:40 am »
Love it is great!  I'd take it!
Logged
Freedom dies one compromise at a time. III%

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: opinion poll
« Reply #12 on: April 18, 2016, 06:23:16 am »
Good enough for the girls I run with ;)

Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: opinion poll
« Reply #13 on: April 18, 2016, 07:43:10 am »
It looks good, I like the contrast.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: opinion poll
« Reply #14 on: April 18, 2016, 09:03:49 am »
Looks might good to me Josh. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1] 2
« previous next »