Author Topic: olivewood flatbow  (Read 7290 times)

0 Members and 1 Guest are viewing this topic.

Offline simon63

  • Member
  • Posts: 1
olivewood flatbow
« on: January 17, 2016, 04:16:34 am »
Hi, Im new.
I hate being new.

I also dont know much about bow building. The one bow I made was from a shoot of Indian Rosewood. We have lots of them growing on the streets of Tel Aviv. Israel. Ihat's where I am located. It shoots ok but i need to improove drastically.

We have some olive trees growing here as well. I was  thinking of making  flatbow usung a 3 inch wide branch. My questions are:
 
1. How long must I dry this wood?
2.If the branch has other branches growing out of it,I need to cut them off, will this weaken the stave.
3. Has anyone had good experiance with olive tree bows?


Offline osage outlaw

  • Member
  • Posts: 11,962
Re: olivewood flatbow
« Reply #1 on: January 17, 2016, 09:37:49 am »
Welcome to Primitive Archer.  You might want to post these questions in the Bow Building page.  You will probably get more help there.
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: olivewood flatbow
« Reply #2 on: January 17, 2016, 12:58:31 pm »
Moving this to "BOWS".
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sapling bowyer

  • Member
  • Posts: 88
Re: olivewood flatbow
« Reply #3 on: January 17, 2016, 02:07:58 pm »
Although I haven't tried but I want to, lot's of people say that it cracks like crazy so you need to go slowly and carefully while seasoning. It may be impossible to season without checking
Time is short

JacksonCash

  • Guest
Re: olivewood flatbow
« Reply #4 on: March 18, 2016, 03:55:50 pm »
I've used some olivewood in wood turning, and it checks like crazy.

Offline Steve Milbocker

  • Member
  • Posts: 447
Re: olivewood flatbow
« Reply #5 on: March 18, 2016, 05:15:43 pm »
I just used some my mom brought back from Israel for tip overlays on my sapwood backed Osage. It has some crazy grain and looks beautiful. I'm not sure if it's good bow wood but the SG is quite high on it. It would make some beautiful veneers for sure.
I'm no where near as smart as my phone!

Offline Steve Milbocker

  • Member
  • Posts: 447
Re: olivewood flatbow
« Reply #6 on: March 18, 2016, 05:23:50 pm »
Olive (Olea europaea)
Olive (Olea europaea)

View More Images Below

Common Name(s): Olive

Scientific Name: Olea spp. (Olea europaea, O. capensis)

Distribution: Europe and eastern Africa

Tree Size: 25-50 ft (8-15 m) tall, 3-5 ft (1.0-1.5 m) trunk diameter

Average Dried Weight: 62 lbs/ft3 (990 kg/m3)

Specific Gravity (Basic, 12% MC): .72, .99

Janka Hardness: 2,700 lbf (12,010 N)

Modulus of Rupture: 22,530 lbf/in2 (155.4 MPa)

Elastic Modulus: 2,577,000 lbf/in2 (17.77 GPa)

Crushing Strength: 11,180 lbf/in2 (77.1 MPa)

Shrinkage: Radial: 5.4%, Tangential: 8.8%, Volumetric: 14.4%, T/R Ratio: 1.6
I'm no where near as smart as my phone!

Offline Mac43560

  • Member
  • Posts: 33
Re: olivewood flatbow
« Reply #7 on: March 18, 2016, 08:48:15 pm »
The specific gravity looks pretty decent.  Thanks for posting that info.  I'm curious how the bow will turn out.  Its a new one to me.  Also curious about other hardwoods from the region. 

Limbit

  • Guest
Re: olivewood flatbow
« Reply #8 on: March 19, 2016, 08:27:58 am »
I have used olive wood a few times and really like it. It is slightly weak in tension, but handles compression well. If you make it long and wide, it should be a great shooter. Smells great, looks great....the only thing bad about it is that it doesn't grow straight.

Offline arachnid

  • Member
  • Posts: 517
Re: olivewood flatbow
« Reply #9 on: March 19, 2016, 02:06:32 pm »
Hi Simon63.
I`ve sent you a personal messege.

Dor
Israel :laugh:

Offline sapling bowyer

  • Member
  • Posts: 88
Re: olivewood flatbow
« Reply #10 on: March 21, 2016, 03:14:38 pm »
I'm also very interested. We have thousands of olive trees. looking forward to any information I can get
Time is short