« previous next »
Pages: [1]

Author Topic: Target arrows  (Read 3020 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Target arrows
« on: March 06, 2016, 02:22:23 pm »
I only shoot targets so I try to get the points smooth so they put out cleanly. My new target is a Bulldog brand. It is a good target but pulling the arrows out is a pain. It squeals like mad when I pull the arrows out. Gets the neighbors Beagles barking sometimes. I finish my arrows with acrylic poly. Before I try different waxes, oils and emollients is there a particular stuff that will quiet them down?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Target arrows
« Reply #1 on: March 06, 2016, 02:57:01 pm »
You might try some car wax on the point ends to help them pull easier.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: Target arrows
« Reply #2 on: March 06, 2016, 04:22:02 pm »
Wax made it worse. So I put a smear of Vaseline one and it was nice and quiet. It lasts about 10-12 shots. Maybe a light coat on the target face? That would be awful messy.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Target arrows
« Reply #3 on: March 06, 2016, 05:09:39 pm »
Bohning String Wax. Nice and quiet. Not as slippery a Vaseline. Easy to pack. Probably good for the arrows.
Logged

Offline Drewster

  • Member
  • Posts: 687
Re: Target arrows
« Reply #4 on: March 06, 2016, 09:54:16 pm »
Try a quick spray of WD-40
Logged
Drew - Boone, NC

Offline DC

  • Member
  • Posts: 10,396
Re: Target arrows
« Reply #5 on: March 07, 2016, 11:32:42 am »
I'll try WD-40 if the wax doesn't last.
Logged

Offline Ed Brooks

  • Member
  • Posts: 1,020
Re: Target arrows
« Reply #6 on: March 07, 2016, 01:11:49 pm »
maybe some bar soap rubbed on them. Good Luck! Ed
Logged
It's in my blood...

Centralia WA,

Offline Buck67

  • Member
  • Posts: 192
Re: Target arrows
« Reply #7 on: March 08, 2016, 10:34:03 am »
Finish the arrows with Shellac and then steel wool it smooth.  That should cut down on the noise.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Target arrows
« Reply #8 on: March 09, 2016, 09:36:11 pm »
I've rubbed my arrows down with Armor All, they slide right out.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline DC

  • Member
  • Posts: 10,396
Re: Target arrows
« Reply #9 on: March 10, 2016, 11:58:13 am »
Quote from: mullet on March 09, 2016, 09:36:11 pm
I've rubbed my arrows down with Armor All, they slide right out.

Another good idea. Years ago my kids had a little plastic slide. They never used it because they would stop halfway down. I squirted a little Armor All on it. It was so fast they darn near broke their ankles when they hit the bottom. I spent the rest of the day trying to wash the stuff off ;D ;D
Logged

Offline Urufu_Shinjiro

  • Member
  • Posts: 709
Re: Target arrows
« Reply #10 on: March 10, 2016, 03:45:38 pm »
Surprised no one has made an astroglide joke yet, Sleek, I'm disappointed man, lol.
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Target arrows
« Reply #11 on: March 11, 2016, 09:15:40 am »
Silicon spray, which you an buy in auto stores, works well. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline DC

  • Member
  • Posts: 10,396
Re: Target arrows
« Reply #12 on: March 11, 2016, 10:02:04 pm »
I think that's what Armor All is isn't it?

Back at the beginning I made a tongue in cheek comment about Vaselining the target. Silicon spray just may work for that. ???
Logged

Offline ajooter

  • Member
  • Posts: 1,234
Re: Target arrows
« Reply #13 on: March 17, 2016, 08:22:17 pm »
Quote from: Buck67 on March 08, 2016, 10:34:03 am
Finish the arrows with Shellac and then steel wool it smooth.  That should cut down on the noise.

Works like a charm!
Logged

Offline ajooter

  • Member
  • Posts: 1,234
Re: Target arrows
« Reply #14 on: March 17, 2016, 08:23:20 pm »
Quote from: Ed Brooks on March 07, 2016, 01:11:49 pm
maybe some bar soap rubbed on them. Good Luck! Ed
This is the post I meant to quote..very good way to get shafts to pull easier
Logged
Pages: [1]
« previous next »