« previous next »
Pages: 1 [2]

Author Topic: Osage bow  (Read 6162 times)

0 Members and 1 Guest are viewing this topic.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Osage bow
« Reply #15 on: March 06, 2016, 10:31:28 pm »
SWEETTTTTTTTTTTT
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Rob W.

  • Member
  • Posts: 77
Re: Osage bow
« Reply #16 on: March 06, 2016, 10:54:03 pm »
Very nice! I really like bendy handles.
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Osage bow
« Reply #17 on: March 06, 2016, 11:12:02 pm »
Nice work, keep em coming
Logged

Offline Emmet

  • Member
  • Posts: 102
Re: Osage bow
« Reply #18 on: March 06, 2016, 11:16:17 pm »
Quote from: Stoner on March 06, 2016, 10:22:42 pm


You mentioned the limb is 1-1/2" wide to 1/2" nock. Is it a pyramid or does it run straight for most of the limb then tapper?

Not a pyramid. It slowly tapers till around the last 8" or so. I was actually trying for something I could keep strung and shoot for most of the day without too much stress. It's just came out like it is. Other bows I have seem to loose a little by the end of the day.
Logged

Offline Emmet

  • Member
  • Posts: 102
Re: Osage bow
« Reply #19 on: March 06, 2016, 11:42:54 pm »
Here's another I had out today. It my attempt at a more primitive type sort of.
 I bought an ugly stave and tried to make something out of it. It was 1" 1/8 wide at the widest full of cracks a bad twist from one end to to other one end was deflexed the other reflexed. About 20 ring per inch 10 knots on the back. I took off about 10 ring or so to get to one that looked like a ring.
 After gluing cracks and bending into shape, heat treating I started to think it may hold.
I expected it to blow apart every time I drew it. I started to call it Bad juju just cause I'd flinch and get ready for pain.
I decided to try some staining and feathers since I seen it on PA and thought why not. I also tried a artificial sinew string.

56 ntn 50" @ 25 Osage 5" brace Osage tip overlays
Logged

Offline Emmet

  • Member
  • Posts: 102
Re: Osage bow
« Reply #20 on: March 06, 2016, 11:46:52 pm »
A little reflex left after shooting.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: Osage bow
« Reply #21 on: March 07, 2016, 06:23:14 am »
Nice work, both turned out very good. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Osage bow
« Reply #22 on: March 07, 2016, 06:28:51 am »
Nice, those belly rings looks great stained
Logged

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Osage bow
« Reply #23 on: March 07, 2016, 06:47:02 am »
Sounds like you had to fight to get a bow out of that second one, those bows can be rewarding when you pull it off successfully.
They both look mighty good, nice work.
Logged
I ain't broke but I'm badly bent.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Osage bow
« Reply #24 on: March 07, 2016, 10:53:02 am »
great shooting,, congrats on your bows,,  :)
Logged

Offline Arrowbuster

  • Member
  • Posts: 162
Re: Osage bow
« Reply #25 on: March 07, 2016, 08:44:46 pm »
Very nice bows. I really like the first one.
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Osage bow
« Reply #26 on: March 07, 2016, 08:49:33 pm »
Well done!
DBar
Logged
Integrity is doing the right thing when no one is looking
Pages: 1 [2]
« previous next »