« previous next »
Pages: 1 2 3 [4] 5 6 ... 27

Author Topic: Redneck Ramada II  (Read 97339 times)

0 Members and 2 Guests are viewing this topic.

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: Redneck Ramada II
« Reply #45 on: March 04, 2016, 08:25:00 pm »
You should record that and show it to us all.
Logged
Steve Bennett

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Redneck Ramada II
« Reply #46 on: March 04, 2016, 08:29:32 pm »
My Dad and brother in law helped me for a while today.  We pulled the trailer out and attached the walls.  We put some temporary braces on them until I can finish framing it up next week.  We moved it to a different building because it was to tall for where I have been storing it.  I have it under a roof now.  The ground is sloped so we jacked up the lower side and front.  I wanted to get it all level before I did any more work to it.  I managed to smash my thumb pretty bad while we were trying to get supports under the frame. 




Logged
I started out with nothin' and I still got most of it left

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Redneck Ramada II
« Reply #47 on: March 04, 2016, 09:04:01 pm »
Smashed a thumb??!! OUCH!
Looks good size now that it's sitting on trailer.
Which side is going to have the slideout unit?  >:D
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline bubby

  • Member
  • Posts: 11,054
Re: Redneck Ramada II
« Reply #48 on: March 04, 2016, 09:07:13 pm »
Dang Clint you look skinny
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Redneck Ramada II
« Reply #49 on: March 04, 2016, 10:02:53 pm »
I'm slowly getting there Bubby.  That is what Guy helped me with.


Knoll, No slide out units on this one. 
Logged
I started out with nothin' and I still got most of it left

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Redneck Ramada II
« Reply #50 on: March 04, 2016, 10:20:52 pm »
Looking good Clint! Wish I had one!

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline chamookman

  • Member
  • Posts: 3,027
Re: Redneck Ramada II
« Reply #51 on: March 05, 2016, 03:47:44 am »
OUCH - It's all fun and games until someone smacks their thumb ! Lookin' good Clint - Bob.
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Chief RID

  • Member
  • Posts: 684
Re: Redneck Ramada II
« Reply #52 on: March 05, 2016, 05:27:38 am »
Love watching your builds, OO!
Logged

Offline RyanR

  • Member
  • Posts: 833
Re: Redneck Ramada II
« Reply #53 on: March 05, 2016, 07:09:31 am »
Quote from: Danzn Bar on March 01, 2016, 05:13:57 pm
Quote from: osage outlaw on February 29, 2016, 09:08:58 pm
Bill, it's going to have 2 windows so I'll get some good cross ventilation going.  I can also get an air freshener for it.  And I have plenty of ear plugs.

I'll pull it up there Clint .......I was just pulling your chain...  :)
You might want to bring a gas mask. >:D

That thing is looking good so far. It's bigger than I thought it was going to be. Hopefully I see it at Marshall.
« Last Edit: March 05, 2016, 07:12:32 am by RyanR »
Logged

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Redneck Ramada II
« Reply #54 on: March 05, 2016, 09:40:51 am »
Looking like a camper now Clint !
Don't  forget an access  door on the side for the wood  storage .
man this is going to be like a Holiday Inn on wheels
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Lumberman

  • Member
  • Posts: 335
Re: Redneck Ramada II
« Reply #55 on: March 05, 2016, 10:22:41 am »
I am surprised you were able to resaw accurately with a band saw that size even with the sweet springboard get-up; cool project enjoying seeing it come together thanks for sharing. You keeping a chart of costs and hours for a total at the end?  I bet Ramada III and IV would get even more efficient
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Redneck Ramada II
« Reply #56 on: March 05, 2016, 05:54:59 pm »
Guy, I'm putting two doors on the back to access the storage area.

Lumber man, I have all the receipts from Lowe's but I haven't been keeping track of the amount or the time I've spent on it.  My band saw did pretty well.  It's a 1hp. 
Logged
I started out with nothin' and I still got most of it left

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Redneck Ramada II
« Reply #57 on: March 05, 2016, 06:20:19 pm »
Quote from: RyanR on March 05, 2016, 07:09:31 am
It's bigger than I thought it was going to be.

+1
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Redneck Ramada II
« Reply #58 on: March 05, 2016, 09:44:10 pm »
Clint what size are you thinking for the bed , I have a couple of extra mattresses  left from a prodgect .
you would be welcome them to them
 if  you want them I will dig them out and measure  them
that would be one more thing out of my shop
they are from a furniture place that did hideabed couches
 they are foam about 4 inches thick
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Redneck Ramada II
« Reply #59 on: March 05, 2016, 10:48:29 pm »
I'm not sure on the size yet Guy.  I was planning on using my queen size air mattress but I'm open for better ideas.  I would guess the bed platform would be 70" x 72" roughly. 
Logged
I started out with nothin' and I still got most of it left
Pages: 1 2 3 [4] 5 6 ... 27
« previous next »