« previous next »
Pages: [1]

Author Topic: Uni-Bond and steam  (Read 2324 times)

0 Members and 1 Guest are viewing this topic.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Uni-Bond and steam
« on: February 22, 2016, 10:13:48 am »
I've read a few times over the years that URAC and/or Uni-Bond joints can safely be warmed up and manipulated. This weekend I took a bow off my rack I never finished, ended up falling out of love with it. I cut 3" off the length and needed to add a bit of reflex back in as its an RD. I wasn't concerned about wrecking the bow, it was either going to work or not work. It worked, twice. Just some food for thought if you find yourself in a spot similar to mine.

Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Uni-Bond and steam
« Reply #1 on: February 22, 2016, 11:08:58 am »
Interesting, how long did you steam it for?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Uni-Bond and steam
« Reply #2 on: February 22, 2016, 11:12:23 am »
10 minutes, I wanted to go 20-30, but knew better than to risk it.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Uni-Bond and steam
« Reply #3 on: February 22, 2016, 12:07:27 pm »
I guess you'll see once you string it backup
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Uni-Bond and steam
« Reply #4 on: February 22, 2016, 12:10:57 pm »
Yea, you will have to let us know how it turns out
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Uni-Bond and steam
« Reply #5 on: February 22, 2016, 12:12:01 pm »
I strung it up an hour later. Shot it bunches yesterday, just lovely now.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bubby

  • Member
  • Posts: 11,054
Re: Uni-Bond and steam
« Reply #6 on: February 22, 2016, 12:48:35 pm »
Good info right there Pearl
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline GB

  • Member
  • Posts: 519
Re: Uni-Bond and steam
« Reply #7 on: February 22, 2016, 12:52:25 pm »
That's good to know.  That stuff adheres to wood like crazy.  I just finished a wood lam bow that I put a handle overlay on.  After rasping and sanding it smooth, there still was a little ring of Unibond around it that I tried to remove because it doesn't take the color of aniline dye well.  I scraped and sanded until I put a dish in the surrounding wood and still couldn't get rid of it.  Finally gave up. ::)
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Uni-Bond and steam
« Reply #8 on: February 22, 2016, 01:23:59 pm »
Nice save, Pearlie. What wood is the belly? ...and how much bend did you put in and how much remains?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Uni-Bond and steam
« Reply #9 on: February 22, 2016, 01:34:36 pm »
Its yew, paduk and boo, Pat. Its the same tri lam I posted last summer/fall. It was 69" ntn then. Now its 64" ntn and shoots much better. It held over half what you see. I'm sure a longer steam would have been much better in that regard, but I'm not a gambling man and a bit of reflex was good enough for me.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: [1]
« previous next »