« previous next »
Pages: [1]

Author Topic: Tiller advice  (Read 3107 times)

0 Members and 1 Guest are viewing this topic.

Offline Arrowbuster

  • Member
  • Posts: 162
Tiller advice
« on: February 11, 2016, 08:36:14 pm »
 I decided to just file temporary nocks in my bow and start the tiller. First bow I have attempted to build so any and all input is very much appreciated. I have not pulled it very far at this point I just wanted to see what yall think.
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Tiller advice
« Reply #1 on: February 11, 2016, 08:42:55 pm »
Arrowbuster....
Looks a little stiff out of the right fade area............
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Arrowbuster

  • Member
  • Posts: 162
Re: Tiller advice
« Reply #2 on: February 11, 2016, 08:48:20 pm »
So  start at the fade and kind of blend in toward the middle on the right side?
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Tiller advice
« Reply #3 on: February 11, 2016, 08:57:44 pm »
Yep take a few scrapes in that area and pull it to see what limb is bending first....that's the weakest limb....scrape the other.
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Tiller advice
« Reply #4 on: February 11, 2016, 09:00:56 pm »
Arrowbuster,
You able to make the Moontree gathering this year???
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Arrowbuster

  • Member
  • Posts: 162
Re: Tiller advice
« Reply #5 on: February 11, 2016, 09:24:07 pm »
Danzn Bar I had not heard of that but just looked it up. I am going to try to make that.
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Tiller advice
« Reply #6 on: February 11, 2016, 09:30:32 pm »
You should ...it's a good time and a lot of bow and arrow build'n go'n on that weekend.   If you can just make it Saturday it would be worth it.  Dave is a great host and has a nice shop.....look'n forward to see'n you there.....
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline mwosborn

  • Member
  • Posts: 806
  • Mitch Osborn
Re: Tiller advice
« Reply #7 on: February 11, 2016, 11:04:04 pm »
AB - I like to use as short as a "long string" as I can when I first get it on the tillering tree.  Get the limbs bending even and the tips moving about 8-10" and then go to a low brace.  (do not pull more than your intended weight).  Currently it does look like the right limb is a bit stronger - but I would shorten string and check.  Looking good so far!
Logged
Enjoy the hunt!  Mitch

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Tiller advice
« Reply #8 on: February 12, 2016, 04:52:54 am »
Long string should be only just long enough to slip onto the bow, it's also worth the effort of setting up a camera to take decent full frame pics from a consistent angle. The devil is in the detail.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,137
  • if you have to ask you wouldn't understand ,Tenn.
Re: Tiller advice
« Reply #9 on: February 12, 2016, 05:25:54 am »
What was said above on the long string, short as possible, also I stay mostly off the fads until I get the rest of the limb bending even, it is easy to get to much bend there right off because that is where it wants to bend [in the middle] when the limbs are stiff. I work the fads some to keep up but try and stay off them until closer to the end tiller. JMO.
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Tiller advice
« Reply #10 on: February 12, 2016, 09:10:28 am »
There are buildalongs on my site. Jawge
http://traditionalarchery101.com/
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »