Got about an hour or so to work on the bow yesterday, almost done with the fence but my helpers ran off so I had to take a break from it. Anywho, I got the PlanA stave profiled in, sides roughed in with hatchet and rasp, belly roughed in. Overall the stave is about an inch thick, not bending much at all yet. It's got a little bit of prop twist on one end, and it's got some reflex/deflex issues to even out some. I hope to get the heat gun on that guy this weekend for the minor corrections, and then thin the tips a little more and get them flipped some.
Don't mind the colorful clamp protector - got to use what you have on hand

.