Let's get things straight.......here's the problem.
I tried to lay out the bow so the crook would be at the smallest part of the handle.
Time for a steam bath.
I wrap aluminum foil around my pot so the heat coming up around the pot doesn't scorch the wood. I'll use different sized pots depending on the area I need to steam. I steamed this 10 minutes......per Rich, since the handle was a bit over 1" think where it needed to bend.
Clamps and form are ready and waiting.
Captured!
Bent a bit past straight.
The big picture. We'll see how well we did in the morning.