« previous next »
Pages: [1]

Author Topic: dent in back?  (Read 2815 times)

0 Members and 1 Guest are viewing this topic.

Offline Rob W.

  • Member
  • Posts: 77
dent in back?
« on: January 05, 2016, 05:01:06 pm »
Somehow I managed to put a pretty good dent about 3in. from one end on the back of this piece of osage. I haven't cleaned up the back yet and I could chase another decent ring a couple down. What do you guys think? Chase it or carry on?



Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: dent in back?
« Reply #1 on: January 05, 2016, 05:10:48 pm »
Lay a damp cloth across it and use a cloths iron and you might be able to draw the dent out with the heat and moisture. Be sure the grain isn't broken. Rub a cotton ball across it both directions. If there are any splinters they will grab the cotton fibers.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Rob W.

  • Member
  • Posts: 77
Re: dent in back?
« Reply #2 on: January 05, 2016, 05:27:20 pm »
No cotton ball splinters. I'm  heating my iron!
Logged

Offline Rob W.

  • Member
  • Posts: 77
Re: dent in back?
« Reply #3 on: January 05, 2016, 05:43:47 pm »
Thanks so much Pat B! I got things ironed out.  ;) I also added something to my bag of tricks. Thanks again.

Rob

Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: dent in back?
« Reply #4 on: January 05, 2016, 06:31:13 pm »
Too close to the end to worry about anyway.
Logged

Offline Hamish

  • Member
  • Posts: 1,549
Re: dent in back?
« Reply #5 on: January 05, 2016, 07:19:08 pm »
That worked out nicely.
Can you remember doing something that would have caused a dent? I ask this because I have come across anomalies even in dry osage that look like dents but aren't.
Logged

Offline Rob W.

  • Member
  • Posts: 77
Re: dent in back?
« Reply #6 on: January 05, 2016, 07:31:46 pm »
I had a bar clamp on it at one time and the bar rubbed there.
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: dent in back?
« Reply #7 on: January 05, 2016, 09:04:06 pm »
That worked slick for ya.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: dent in back?
« Reply #8 on: January 05, 2016, 09:15:44 pm »
Great timing for this post, Rob! Just noticed dent on back of hackberry stave am playin' with.
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: dent in back?
« Reply #9 on: January 06, 2016, 04:52:54 am »
I would carry on as PatM said to close to the end to worry about.  :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Ghost308

  • Member
  • Posts: 36
Re: dent in back?
« Reply #10 on: January 06, 2016, 11:52:38 pm »
I learned that trick in high school and after raising 3 boys my wood tables have seen alot of steam  lol
Logged
Pages: [1]
« previous next »