« previous next »
Pages: [1]

Author Topic: Bending laminates  (Read 4695 times)

0 Members and 1 Guest are viewing this topic.

Offline SCbake

  • Member
  • Posts: 1
Bending laminates
« on: December 29, 2016, 06:20:26 pm »
Hi folks. I returned to an old project where I have a bamboo backed hickory bow ready for tillering. I used epoxy for the join.  From improper storage the tip of one limb has twisted. How can I straighten the limb without separating the bamboo from the hickory?

Thanks in advance,
SCbake
Logged

Offline aaron

  • Member
  • Posts: 1,037
Re: Bending laminates
« Reply #1 on: December 29, 2016, 07:49:55 pm »
Exactly what type of epoxy did you use?
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline bow101

  • Member
  • Posts: 2,235
Re: Bending laminates
« Reply #2 on: December 31, 2016, 11:46:57 pm »
I have actually used TB3 and used heat to add more reflex into the tips without compromising the stability or strength.  I use welwood plastic resin now.  Not sure about bamboo, I use maple, oak and BW for lams.

Good luck.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell
Pages: [1]
« previous next »