Author Topic: Coyote Patch Knife (Read 3931 times)

Peatreg · « **on:** December 21, 2015, 11:29:59 pm »

Aged coyote jawbone handle with decorative sinew wraps. 3 7/8" forged blade. 3 1/2" cutting edge, 8" overall length. Finally got a sheath done for it. Dyed brain tanned neck sheath with rawhide liner. Beaded edge with hand rolled cones and dyed deer hair. Quill wrapped neck strap.

chamookman · « **Reply #1 on:** December 22, 2015, 03:41:14 am »

Nice ! Bob

Pappy · « **Reply #2 on:** December 22, 2015, 03:52:14 am »

That's a beauty, love neck knives.

Pappy

mullet · « **Reply #3 on:** December 22, 2015, 10:51:19 am »

Now that is cool. Is the tang inside of the jaw?

Aaron H · « **Reply #4 on:** December 22, 2015, 11:17:22 am »

Very cool

Trapper Rob · « **Reply #5 on:** December 22, 2015, 12:13:47 pm »

Very nice.

Zuma · « **Reply #6 on:** December 22, 2015, 02:44:55 pm »

Very slick.

Nice chilly background.

Zuma

Peatreg · « **Reply #7 on:** December 22, 2015, 08:48:36 pm »

Yes Mullet the tang goes close to 3/4" through the length of the handle. The curve of the tang matched perfectly with the curve of the handle. I had to use a small flat hobby file to get the opening wide enough to accept it. If you look close you can see the tang, that's how thin the handle is at the top

BowEd · « **Reply #8 on:** December 22, 2015, 09:14:37 pm »

Cool..Peatreg.Another good use for a coyote.

mullet · « **Reply #9 on:** December 22, 2015, 09:45:25 pm »

Thanks! I was trying to figure out how you did it. I saw the sinew spaced down the jaw, I was wondering if it was on the inside.

burchett.donald · « **Reply #10 on:** December 30, 2015, 12:35:33 pm »

Peatreg,
Awesome looking work from you again

I really like this neck knife

Don

Peatreg · « **Reply #11 on:** December 30, 2015, 01:06:32 pm »

Thanks for the compliments! I screwed up that sheath at least once and had to start over. New liner, getting it wet formed to the knife, etc.

mullet · « **Reply #12 on:** December 30, 2015, 07:56:47 pm »

How did you mount the blade?

Peatreg · « **Reply #13 on:** December 30, 2015, 08:56:35 pm »

2500 lb. 24hr epoxy

Scottski · « **Reply #14 on:** December 30, 2015, 11:43:26 pm »

NICE!! I like that!

Primitive Archer