Author Topic: Scraped waaay too much... burn it?  (Read 8426 times)

0 Members and 2 Guests are viewing this topic.

Offline Jodocus

  • Member
  • Posts: 897
Re: Scraped waaay too much... burn it?
« Reply #30 on: December 27, 2016, 03:43:47 am »
  I'd set it in the corner to be finish later as a kids bow.
 
  Learn from the exsperance move on to the next bow.

Good advice, kids are an excellent audience to make bows for, those are the ones that get used a lot and are most appreciated probably of all the bows I gifted. The joy of kids over a good shooting bow is priceless.
Don't shoot!

Offline DuBois

  • Member
  • Posts: 2,020
Re: Scraped waaay too much... burn it?
« Reply #31 on: December 27, 2016, 09:41:14 pm »
Pike the limb on the left about 8" and make an asymmetrical.

Offline Selfbowman

  • Member
  • Posts: 3,119
Re: Scraped waaay too much... burn it?
« Reply #32 on: December 27, 2016, 10:48:18 pm »
What does pike the bow mean? Arvin
Well I'll say!!  Osage is king!!

Offline DuBois

  • Member
  • Posts: 2,020
Re: Scraped waaay too much... burn it?
« Reply #33 on: December 27, 2016, 11:19:01 pm »
cut off that tip to increase the weight.

Offline ty_in_ND

  • Member
  • Posts: 323
Re: Scraped waaay too much... burn it?
« Reply #34 on: December 28, 2016, 11:26:33 am »
Looks great! It goes to show that perseverance pays off.
"The best prize that life has to offer is the chance to work hard at work worth doing."

Offline DuBois

  • Member
  • Posts: 2,020
Re: Scraped waaay too much... burn it?
« Reply #35 on: December 28, 2016, 11:29:10 am »
Oops, sorry  :-[
Yeah that's a fine bow man. Great save!