« previous next »
Pages: [1]

Author Topic: Dimensions for mesquite bow?  (Read 1356 times)

0 Members and 1 Guest are viewing this topic.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Dimensions for mesquite bow?
« on: November 28, 2015, 02:09:39 pm »
Could anyone tell me dimensions to start with for mesquite bows. I have several stave ranging from 50"-72". I've read that mesquite needs to be sinew backed. And also what's the best way to straighten them? Steam or dry heat.  Thanks in advance Tim
Logged
Freedom dies one compromise at a time. III%

Offline Badger

  • Member
  • Posts: 8,124
Re: Dimensions for mesquite bow?
« Reply #1 on: November 28, 2015, 02:13:26 pm »
  Mesquite chrysals very easily. Most people I know who have worked with it never fool with it anymore. I have seen a couple of decent bows from it. I would not add any reflex and maybe go about 1 3/4 wide and 66" long if you have enough wood.
Logged

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Dimensions for mesquite bow?
« Reply #2 on: November 28, 2015, 06:59:46 pm »
Thanks badger I appreciate it sir!
Logged
Freedom dies one compromise at a time. III%

Offline bubby

  • Member
  • Posts: 11,054
Re: Dimensions for mesquite bow?
« Reply #3 on: November 28, 2015, 07:11:13 pm »
A nice bendy should do it
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »