Author Topic: New Project  (Read 1358 times)

0 Members and 1 Guest are viewing this topic.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
New Project
« on: October 29, 2015, 10:29:03 am »
This has been in the works for over a year. Hunter Bob traded this stave to Tyke. Tyke gave it to me. I gave it back to Tyke when he was out of bow wood (Begrudgingly). Tyke  quit making bows in the spring to make knives. Last week he gave it back. It was still bark on when I gave it back to Tyke.

The inside of the knot has a crack on the top and bottom, directly in the center line. Next on the list is to finish single ringing it. The limbs are done, and the bottom side of the knot. The stave is 60 inches, the knot is about 7 inches above center. The line below the knot is the center of the bow.

What advice would you throw out?
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: New Project
« Reply #1 on: October 29, 2015, 10:57:22 am »
Holey Moley!  Good luck with it.
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: New Project
« Reply #2 on: October 29, 2015, 11:39:32 am »
 Give it back to Tyke!  ;D  >:D  ;) Just kidding.
At that length you better get as much wood bending as possible. Put some cross hairs in the hole for a Texas peep site.  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: New Project
« Reply #3 on: October 29, 2015, 11:47:50 am »
I made a bow almost exactly like that, knot hole cracks and all. Its name is "Mullet". It's probably posted around June/July of 2013. Not sure it will help, but proof it can happen. I believe the bow is 50 @ 27 61-62"? I haven't touched it or looked at it in a few years.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

blackhawk

  • Guest
Re: New Project
« Reply #4 on: October 29, 2015, 12:58:16 pm »
Give it back to me because i think it came from my pile originally...lol 😁

Make sure to follow the flow better and smoother around that hole...one side has to sharp of a taper after it and isnt following the grain as well as it should be. Cross ur fingers,say a prayer,and yank it back without fear ;)

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: New Project
« Reply #5 on: October 29, 2015, 01:23:00 pm »
This chunk of wood is gonna teach me how to go slow. It has so far.
Good to hear that it came from another person as well.
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline willie

  • Member
  • Posts: 3,197
Re: New Project
« Reply #6 on: October 29, 2015, 02:57:06 pm »
Good luck, that quite a challenge

Quote
Put some cross hairs in the hole for a Texas peep site.

and if you don't make weight, you could probably sell it to Hollywood for the next "hero saves the world with a bow" flic