« previous next »
Pages: [1]

Author Topic: Glue question  (Read 1455 times)

0 Members and 1 Guest are viewing this topic.

Offline snowplow

  • Member
  • Posts: 52
Glue question
« on: October 22, 2015, 03:13:33 pm »
Hi guys, what glue would you attach an antler tip overlay? I've never done one!

Thank you, love this site!
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Glue question
« Reply #1 on: October 22, 2015, 03:19:38 pm »
I put all of mine on with Loctite super glue.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Glue question
« Reply #2 on: October 22, 2015, 03:19:52 pm »
Good super glue. Sand the mating surface clean on the antler, blow out the pores good. Then back fill with glue until it wont take anymore. After it dries hard sand it smooth again and use the same glue to glue it to your bow.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Glue question
« Reply #3 on: October 22, 2015, 03:42:57 pm »
What Pearlie said! 
« Last Edit: October 22, 2015, 10:05:58 pm by Pat B »
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline snowplow

  • Member
  • Posts: 52
Re: Glue question
« Reply #4 on: October 22, 2015, 04:07:20 pm »
Thanks fellas, I would have figured it would be something fancy. This is great!

Are we talking about the old style thin stuff or the new gel type?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Glue question
« Reply #5 on: October 22, 2015, 04:43:41 pm »
Thin super glue to saturate the antler pith first and either thin or gel to glue to the bow. Do be sure you have very good, well mated glue surfaces.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: Glue question
« Reply #6 on: October 22, 2015, 06:06:47 pm »
I use the same glue as pearl and swear by it loktight professional you can get it anywhere
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »