« previous next »
Pages: [1]

Author Topic: atlatl and dart questions  (Read 1926 times)

0 Members and 1 Guest are viewing this topic.

riverrat

  • Guest
atlatl and dart questions
« on: October 06, 2015, 01:22:03 pm »
on most atlatls ive seen folks make ,theres a spur to hold the dart on the atlatl and a hole in the back of the dart. i make them like this myself. however, would it work if it was the opposite? i mean the dart would be sharpened to a dull rounded point in the back and the atlatl would have a divet in it for the dart to rest into? it seems it would be a lot easier to build this way than the normal way ive been doing it. has anyone else tried this? thanks Tony
Logged

Offline le0n

  • Member
  • Posts: 540
Re: atlatl and dart questions
« Reply #1 on: October 06, 2015, 01:27:27 pm »
sounds completely logical, so i don't see why it wouldn't work.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: atlatl and dart questions
« Reply #2 on: October 07, 2015, 04:48:29 am »
I make them with the dart fore shaft tapered on the back and the main shaft is large Cain so the hole is already there, just push the dart in the hole. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bowandarrow473

  • Member
  • Posts: 696
Re: atlatl and dart questions
« Reply #3 on: October 07, 2015, 04:06:37 pm »
You can do it that way, I've heard several references to doing it like that. The atlatl has a depression and the shaft fits not it.
Logged
Whatever you are, be a good one.

riverrat

  • Guest
Re: atlatl and dart questions
« Reply #4 on: October 08, 2015, 04:03:32 am »
im going to try it soon. thanks Tony
Logged
Pages: [1]
« previous next »