« previous next »
Pages: [1]

Author Topic: Tiller Help / Alleviate my stress  (Read 2408 times)

0 Members and 2 Guests are viewing this topic.

Offline JRMakowski

  • Member
  • Posts: 34
Tiller Help / Alleviate my stress
« on: September 17, 2015, 01:20:31 pm »
Well here goes, I can see right limb looks a little stiff compared to left (i think pic exaggerates it a bit) Im currently around 60 lbs at 26" on a short tillering para cord string I want to cut an arrow rest and didn't know if that weakens the top limb at all? I havent braced it yet either, So far just around 5/8" set has taken in and it pretty even on both limbs within a 16th" I also tried to make handle less of a sharp transition might need to do more. Well any advice appreciated ,  Josh
« Last Edit: September 17, 2015, 01:50:02 pm by JRMakowski »
Logged
Id Rather Be Lucky Then Good!

Offline JonW

  • Member
  • Posts: 1,906
Re: Tiller Help / Alleviate my stress
« Reply #1 on: September 17, 2015, 01:24:51 pm »
Stay away from inner thirds for now. Too much bend there compared to the rest of limb.
Logged

Offline JRMakowski

  • Member
  • Posts: 34
Re: Tiller Help / Alleviate my stress
« Reply #2 on: September 17, 2015, 01:28:23 pm »
Figured better put one un pulled as well, Ty Jon hope i didnt go to much already.....
Logged
Id Rather Be Lucky Then Good!

Offline Wooden Spring

  • Member
  • Posts: 437
Re: Tiller Help / Alleviate my stress
« Reply #3 on: September 17, 2015, 01:38:00 pm »
Good place to start, but both limbs are stiff in the middle. When you tiller a bow, get the middle of the limb bending first, then nearest the handle, and lastly at the tips. Getting a bow to bend too much near the handle too soon will lead to string follow.
Logged
"Everything that moves shall be food for you..." Genesis 9:3

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Tiller Help / Alleviate my stress
« Reply #4 on: September 17, 2015, 02:15:17 pm »
The tips are coming back far enough to get it braced.
The long string will deceive you if you leave it on too long.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tiller Help / Alleviate my stress
« Reply #5 on: September 17, 2015, 02:53:45 pm »
Like Del said, get her braced. A low brace of about 3" or 4" is all you need, plus at low brace you can see how the string tracks.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JRMakowski

  • Member
  • Posts: 34
Re: Tiller Help / Alleviate my stress
« Reply #6 on: September 17, 2015, 03:50:25 pm »
First of all ty all for the replies  :) For bracing the bow do i use my normal string i made my bow is 70.5 NTN I have a 67.5" string, But i can make a longer one if needed, Also does cutting an arrow rest weaken the tiller on top limb at all?
Logged
Id Rather Be Lucky Then Good!

Offline JRMakowski

  • Member
  • Posts: 34
Re: Tiller Help / Alleviate my stress
« Reply #7 on: September 17, 2015, 08:47:18 pm »
Well braced bow and it was a mess! :o :-\ >:(  ty for recommending this Im pretty sure if i had kept going my bow would have been junked.) I cant seen to keep the string in the grooves, I believe its because one limb was so much stiffer then the other, my bow literally had one curved limb one limb that was almost straight I came to find my tillering tree is junk I un braced it and made a makeshift tillering stick and it looked the same as the whompy brace so I scraped for few hours and got it a little closer (pic Below) I decided to glue my Bocote tips on in hopes it will help keep string on also and will continue tillering as soon as tips dry. Ty Josh
Logged
Id Rather Be Lucky Then Good!

Offline bow101

  • Member
  • Posts: 2,235
Re: Tiller Help / Alleviate my stress
« Reply #8 on: September 17, 2015, 08:50:22 pm »
Quote from: JonW on September 17, 2015, 01:24:51 pm
Stay away from inner thirds for now. Too much bend there compared to the rest of limb.

+2
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Tiller Help / Alleviate my stress
« Reply #9 on: September 17, 2015, 08:51:04 pm »
Not looking bad, but I think it may be bending a bit too much at the fades still. I would work about 5" after the fades down to the tips if I were you, but it's hard to tell with the sideways picture.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Tiller Help / Alleviate my stress
« Reply #10 on: September 17, 2015, 08:52:10 pm »
Quote from: bow101 on September 17, 2015, 08:50:22 pm
Quote from: JonW on September 17, 2015, 01:24:51 pm
Stay away from inner thirds for now. Too much bend there compared to the rest of limb.

+2

Yeah I see it on the left limb too.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Tiller Help / Alleviate my stress
« Reply #11 on: September 17, 2015, 08:53:44 pm »
Ohhh, I didn't see it was a reflex delfex. I never know the correct way to tiller these things out...
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline JRMakowski

  • Member
  • Posts: 34
Re: Tiller Help / Alleviate my stress
« Reply #12 on: September 17, 2015, 09:55:57 pm »
just hope i can fix it and still keep it around 50 lbs @ 28"
Logged
Id Rather Be Lucky Then Good!

Offline randman

  • Member
  • Posts: 647
Re: Tiller Help / Alleviate my stress
« Reply #13 on: September 19, 2015, 01:46:41 am »
Quote
When you tiller a bow, get the middle of the limb bending first, then nearest the handle, and lastly at the tips.

Actually I've found following Halfeye's advice to get the tips coming around first has much improved my tillering technique...
Logged
Beauty is in the eye of the beer holder.
Pages: [1]
« previous next »