Author Topic: HHB  (Read 2910 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,870
  • Keep it flexible
    • Marc's Bows and Arrows
HHB
« on: September 10, 2015, 10:23:38 am »
My wife had an abo drumming group meeting last night and after bringing her there I drove down to an area I had not been to before.  The road was mostly uphill with very few houses and petered out to a cell tower station.  I stopped and went for a walk.  Lots of hardwoods including White Ash, Maple, Oak and some HHB but because the area had been logged over perhaps 40 or 50 years ago most of the HHB were not very big.  I did run across a few around 4 to 6 inches across and a the odd tree around 10" but most were quite twisted and gnarly.  I did find one that was decent and will go back to harvest it.  I took a picture of the nice one and a picture of one that has some serious spiral growth, I'm sure you guys will see the difference.

 

Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: HHB
« Reply #1 on: September 10, 2015, 10:35:45 am »
Nice tree.  I wish I could find some HHB around me
I started out with nothin' and I still got most of it left

Online Pappy

  • Global Moderator
  • Member
  • Posts: 31,915
  • if you have to ask you wouldn't understand ,Tenn.
Re: HHB
« Reply #2 on: September 10, 2015, 10:43:04 am »
Yep that 2nd ones is nice one for sure. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,870
  • Keep it flexible
    • Marc's Bows and Arrows
Re: HHB
« Reply #3 on: September 10, 2015, 10:53:20 am »
That second tree is about 6" at the butt.  It has a couple knots on one side but it is pretty straight.  I walked for over an hour before finding that second tree.  I did come across a couple nice Elm but they were a bit small and I don't need any Elm right now
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,890
  • Eddie Parker
Re: HHB
« Reply #4 on: September 10, 2015, 07:51:55 pm »
I wish we had HHB down here.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: HHB
« Reply #5 on: September 10, 2015, 08:17:30 pm »
I wish we had HHB down here.
Ditto..................
DBar
Integrity is doing the right thing when no one is looking

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: HHB
« Reply #6 on: September 10, 2015, 08:45:00 pm »
Oh quit whining you guys, it's not that great of bow wood anyway. Marc will tell you that. Eddie get your butt up to Marshall and I'll give you some. Bill, you shoulda' asked ;)

Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: HHB
« Reply #7 on: September 10, 2015, 09:32:20 pm »
Oh quit whining you guys, it's not that great of bow wood anyway. Marc will tell you that. Eddie get your butt up to Marshall and I'll give you some. Bill, you shoulda' asked ;)

Not really whining... just wish I had the trees to go out and get one myself from scratch.......if you know what I mean...but I'd be glad to be gifted one... >:D :) ;) 


Integrity is doing the right thing when no one is looking

Offline bowandarrow473

  • Member
  • Posts: 696
Re: HHB
« Reply #8 on: September 10, 2015, 09:49:21 pm »
I've wanted to work HHB for awhile but it's not at the top of my list.
However I would love to work some osage or yew as I have heard of their legendary bow qualities.
But I don't think that it is worth spending 60 or more dollars on a stave that I can equal with hickory or elm. Put some reflex in or heat treat and I'd imagine that my elm or hickory bows easily equal an osage bow.
Whatever you are, be a good one.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,870
  • Keep it flexible
    • Marc's Bows and Arrows
Re: HHB
« Reply #9 on: September 10, 2015, 09:50:17 pm »
This area I found is quite large and I didn't cover very much of it so I'm sure there are a few more trees out there that will be worth cutting.  It was getting late by the time I found that last tree.  Fortunately it's not far from the road.  It looks to be a good area for bow-wood.  The only downside is all the garbage people have been dumping up there
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,890
  • Eddie Parker
Re: HHB
« Reply #10 on: September 11, 2015, 03:37:33 pm »
The best HHB I've worked came from Marc. I've never seen any straighter.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline dylanholderman

  • Member
  • Posts: 787
Re: HHB
« Reply #11 on: September 11, 2015, 06:33:34 pm »
come on now that first one isn't too bad :P O:) there's a HHB in the park behind my house that has that much twist in about two feet of trunk :o

still i agree with you, i'd leave the first one and take the second :)

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,870
  • Keep it flexible
    • Marc's Bows and Arrows
Re: HHB
« Reply #12 on: September 11, 2015, 08:34:13 pm »
Why thank you Eddie.

That is 2' of trunk Dylan  :)

You can make anything you want with top quality Elm.

If you believe that Chris then you might as well give all your HHB to DBar, I'm sure he will take it off your hands
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,870
  • Keep it flexible
    • Marc's Bows and Arrows
Re: HHB
« Reply #13 on: September 21, 2015, 05:25:59 pm »
I went out and cut that tree yesterday.  I brought my little buck saw with me and figured I would be able to cut it down easily enough with its 2' long blade.  It's been awhile since I last cut some HHB and I had forgotten how hard it is.  Took me 40 minutes to get the tree on the ground and another 20 minutes to cut 2 logs out of it, man was I tired.  Won't do that again, getting too old to be cutting them by hand anymore.  There's not a lot of bow wood in the second log I cut out of the tree but the first 6' is good.

Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: HHB
« Reply #14 on: September 22, 2015, 08:48:06 am »
That top picture of the log on the right, that's a beauty Marc. You could always slat some of the less desirable stuff up and make backed bows. I meant to cut more this season, but didn't.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.