« previous next »
Pages: [1]

Author Topic: backing over spar urethane?  (Read 1822 times)

0 Members and 1 Guest are viewing this topic.

Offline cutty

  • Member
  • Posts: 64
backing over spar urethane?
« on: September 06, 2015, 10:55:50 pm »
I have a bow backed with ugly brown linen and sealed in spar urethane.  Can I put snakeskins over it or do I have to live with it?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: backing over spar urethane?
« Reply #1 on: September 06, 2015, 11:23:33 pm »
You can put the snake skins over using TBIII but I wouldn't waste good snake skins on an unsatisfactory bow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline cutty

  • Member
  • Posts: 64
Re: backing over spar urethane?
« Reply #2 on: September 06, 2015, 11:55:06 pm »
The bow itself is a good shooter, its just the brown backing I don't like,  so I could put skins over urethane with TBIII.  any prep work on the urethane?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: backing over spar urethane?
« Reply #3 on: September 06, 2015, 11:58:19 pm »
I'd wipe it down with alcohol first to remove any oil and finger prints and maybe a light sanding.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline cutty

  • Member
  • Posts: 64
Re: backing over spar urethane?
« Reply #4 on: September 07, 2015, 12:05:26 am »
sounds good, thanks Pat!
Logged
Pages: [1]
« previous next »