« previous next »
Pages: [1]

Author Topic: flint and bear jaw  (Read 2093 times)

0 Members and 1 Guest are viewing this topic.

Offline Spotted Dog

  • Member
  • Posts: 700
flint and bear jaw
« on: August 31, 2015, 10:19:51 am »

Just finished this one. Blade I traded for from Terry DeWitt. Very sharp !!   Jaw from an old bear. teeth worn off.
Pine pitch , sinew and hide glue.
Logged
A three strand cord is not easily broken. Ecc.4:12

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,544
Re: flint and bear jaw
« Reply #1 on: August 31, 2015, 11:17:50 am »
Nicely done Dog. Old bear jaws look more practical and comfortable with the worn down teeth.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Aaron H

  • Member
  • Posts: 3,437
Re: flint and bear jaw
« Reply #2 on: August 31, 2015, 12:39:15 pm »
Sweet blade Dan!
Logged

Offline Spotted Dog

  • Member
  • Posts: 700
Re: flint and bear jaw
« Reply #3 on: August 31, 2015, 08:26:46 pm »
yes it is easier on the hand. I wish I would of had more money on me at the fair.
A fellow had a tub of bear and coyote jaws..
This is a real nice blade from terry.
Logged
A three strand cord is not easily broken. Ecc.4:12

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,916
  • if you have to ask you wouldn't understand ,Tenn.
Re: flint and bear jaw
« Reply #4 on: September 01, 2015, 04:11:57 am »
Loos nice, good job mounting it. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

riverrat

  • Guest
Re: flint and bear jaw
« Reply #5 on: September 11, 2015, 11:37:49 am »
thats sweet! Tony

Logged
Pages: [1]
« previous next »